Measurement

driador·antenna-tuner·kicad/measurement.kicad_pcb

Measurement PCB layout, top view — open source board by driador

About the Measurement PCB

Measurement is an open source PCB design by driador, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 100 × 74 mm, with 75 components from 34 distinct parts.

Other key parts include the AD8302ARUZ, TLV3501AIDR, 74LVC74AD, SN74HC4040DR and AMS1117-3.3. By type, the board carries 31 resistors, 26 capacitors, 6 ICs, 5 diodes, 4 connectors and 2 inductors.

It belongs with the rf & radio and test & measurement designs in this gallery.

From the project

1500 W automated antenna tuner for a 170 ft doublet on 600 Ω ladder line, 160–10 m: a T-network with vacuum capacitors and a roller inductor, Teensy 4.1 firmware, KiCad boards, build123d/FreeCAD drawings and NEC-2 models. Open hardware (CERN-OHL-W v2); firmware GPL-3.0.

KF0OWR's homebuilt 1500 W remote balanced tuner for a doublet on 160–10 m. It uses a 34 µH roller inductor, two vacuum capacitors and Tohtsu relays, and sits in a wall-mounted 16 × 16 × 24″ cabinet. The design log is the source of truth. Everything else in this repo (CAD, drawings, NEC models, KiCad boards) supports it, and the log cites these files by their repo paths.

Main components on the Measurement

AD8302ARUZTLV3501AIDR74LVC74ADSN74HC4040DRAMS1117-3.3LM393DR

Measurement bill of materials (BOM)

75 components, 34 distinct parts.

QtyPartRefs
1
AD8302ARUZ
U1
1
TLV3501AIDR
U2
1
74LVC74AD
U3
1
SN74HC4040DR
U4
1
AMS1117-3.3
U5
1
LM393DR
U6
1
SMA FWD in
J1
1
SMA REF in
J2
1
SMA /1024 out
J3
1
J-S sampler
J4
1
10k 3296W
RV1
2
1N5711W
D1, D2
2
BAT54SLT1G
D3, D4
1
SMF33A
D5
2
BLM31PG601SN1L
FB1, FB2
4
10n
C1, C3, C7, C8
2
10n C0G
C2, C4
11
100n
C5, C6, C10, C13, C14, C15, C16, C18 +3
2
100p C0G
C9, C21
3
10u
C11, C17, C24
Show 14 more
QtyPartRefs
1
1n C0G
C12
1
3p3 1kV NP0
C20
1
2n2 C0G
C22
1
100u 10V
C25
4
105 1W
R1, R2, R7, R8
3
22k
R3, R9, R25
6
10k
R4, R10, R14, R15, R16, R26
2
1k62
R5, R11
2
52R3
R6, R12
3
4k7
R13, R19, R22
3
1M
R17, R21, R24
6
1k
R18, R27, R28, R29, R30, R31
1
680
R20
1
100k
R23

Measurement design files

The KiCad project lives in the driador/antenna-tuner repository on GitHub; these links point at the commit this page was built from.

Measurement: common questions

How big is the Measurement PCB?

The Measurement measures 100 × 74 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Measurement?

75 components, from 34 distinct parts. The full bill of materials is listed on this page.

Where can I download the Measurement design files?

From the driador/antenna-tuner repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Measurement design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which driador chose for the repository.

More boards in antenna-tuner

Similar boards