W7HAK-gobox
drollette·W7HAK-gobox·pcb/w7hak_hat/w7hak_hat.kicad_pcb
About the W7HAK-gobox PCB
W7HAK-gobox is an open source PCB design by drollette, published on GitHub. It is a 2-layer board measuring 65 × 30 mm, with 0 components from 0 distinct parts.
It belongs with the power & battery, rf & radio and sensors designs in this gallery.
From the project
A field-deployable amateur radio go box (callsign W7HAK) with real-time battery telemetry, environmental monitoring, and a local Grafana dashboard accessible over a USB gadget-mode connection.
A field-deployable amateur radio go box (callsign W7HAK) with real-time battery telemetry, environmental monitoring, and a local Grafana dashboard accessible over a USB gadget-mode connection.
All system power flows from the battery through a single monitored path before reaching the fuse block. An LTC3780 10A Buck-Boost Converter allows charging from any unconditioned DC source (12V automotive charger, vehicle accessory port, generic power supply) via an Anderson Powerpole input connector. The LTC3780 is physically calibrated to a 14.6V CV / 5A CC LiFePO4 charging profile using its onboard…
W7HAK-gobox design files
The KiCad project lives in the drollette/W7HAK-gobox repository on GitHub; these links point at the commit this page was built from.
W7HAK-gobox: common questions
How big is the W7HAK-gobox PCB?
The W7HAK-gobox measures 65 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the W7HAK-gobox?
0 components, from 0 distinct parts. The full bill of materials is listed on this page.
Where can I download the W7HAK-gobox design files?
From the drollette/W7HAK-gobox repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the W7HAK-gobox design in my own project?
The repository has no license, so all rights stay with drollette. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k