Portapack hackrf one
About the Portapack hackrf one PCB
Portapack hackrf one is an open source PCB design by dronefpgabasedarchitecture-pizza, published on GitHub under the GPL-2.0 license. It is a board measuring 120 × 75 mm, with 92 components from 34 distinct parts.
Other key parts include the 5M40ZE64, REGULATOR_SOT23_5 and WM8731SEDS. By type, the board carries 33 resistors, 30 capacitors, 8 connectors, 6 test points, 3 ICs and 3 transistors.
It belongs with the rf & radio designs in this gallery.
From the project
Portable software-defined radio add-on for HackRF Jawbreaker
Main components on the Portapack hackrf one
Portapack hackrf one bill of materials (BOM)
92 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 5M40ZE64 | IPC_QFP40P900X900X120-65N | U1 |
| 1 | REGULATOR_SOT23_5 | IPC_SOT95P280X110-5N | U2 |
| 1 | WM8731SEDS | IPC_SOP65P780X200-28N | U3 |
| 2 | MOSFET_P | IPC_SOT95P240X110-3N | Q1, Q2 |
| 1 | MOSFET_N | IPC_SOT95P230X110-3N | Q3 |
| 1 | MIC_ELECTRET | CUI_CMA-4544PF-W | X1 |
| 1 | MICROSD_DETSW | ALPS_SCHA4B0400 | J2 |
| 1 | KINGTECH_DW0240A2BZ_FPC | MOLEX_54132-40XX_LR | J3 |
| 1 | TRRS_SW_JACK | CUI_SJ-43516-SMT | P1 |
| 2 | TRS_JACK | CUI_SJ-3524-SMT | P2, P3 |
| 1 | HACKRF_ONE_P20 | HEADER_11X2_REV_SM_254 | P20 |
| 1 | HACKRF_ONE_P22 | HEADER_13X2_REV_SM_254 | P22 |
| 1 | HACKRF_ONE_P28 | HEADER_11X2_REV_SM_254 | P28 |
| 1 | BATTERY | MPD_BU2032SM-BT-G | BT1 |
| 5 | HOLE1 | HOLE_3200UM_VIAS | H1, H2, H3, H4, H5 |
| 1 | KINGTECH_DW0240A2BZ_PANEL | KINGTECH_DW0240A2BZ_PANEL | LCD1 |
| 1 | CK_TSWB-3N-CB | CK_TSWB-3N-CB222_LFS | SW1 |
| 6 | TP | TP_1MM | TP1, TP2, TP3, TP4, TP5, TP6 |
| 2 | 220U | IPC_CAPAE830X620N | C1, C2 |
| 3 | 1U | IPC_CAPAE430X540N | C3, C11, C12 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 220P | IPC_CAPC1005X55N | C4, C5, C6, C9, C10 |
| 14 | 100N | IPC_CAPC1005X55N | C7, C15, C16, C18, C19, C20, C21, C22 +6 |
| 2 | 10U | IPC_CAPC1608X95N | C8, C27 |
| 2 | 10U | IPC_CAPAE430X540N | C13, C14 |
| 1 | 1U | IPC_CAPC1608X95N | C17 |
| 1 | DNI | IPC_CAPC1005X55N | C23 |
| 1 | R | IPC_RESC1005X40N | R1 |
| 5 | 47K | IPC_RESC1005X40N | R2, R3, R4, R17, R18 |
| 1 | 680R | IPC_RESC1005X40N | R5 |
| 17 | 10K | IPC_RESC1005X40N | R6, R12, R13, R14, R15, R16, R19, R20 +9 |
| 4 | 5K6 | IPC_RESC1005X40N | R7, R8, R10, R11 |
| 1 | 100K | IPC_RESC1005X40N | R9 |
| 3 | 100R | IPC_RESC1005X40N | R21, R22, R26 |
| 1 | R | IPC_RESC1608X55N | R30 |
Portapack hackrf one design files
The KiCad project lives in the dronefpgabasedarchitecture-pizza/portapack repository on GitHub; these links point at the commit this page was built from.
Portapack hackrf one: common questions
How big is the Portapack hackrf one PCB?
The Portapack hackrf one measures 120 × 75 mm and is 1.6 mm thick.
How many components are on the Portapack hackrf one?
92 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the Portapack hackrf one design files?
From the dronefpgabasedarchitecture-pizza/portapack repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Portapack hackrf one design in my own project?
Yes, under the terms of its GPL-2.0 license, which dronefpgabasedarchitecture-pizza chose for the repository.
More boards in portapack
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568
GoodPocketWatch
75.2 × 101.2 mm56 parts2LNo license568
Goodwatch31
25.6 × 27.6 mm23 parts2LNo license568