8 open source boards using the 5M40ZE64

Real designs built with the 5M40ZE64, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the 5M40ZE64

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 5M40ZE64 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 38 has a resistor to GND on 7 of 8 designs, most often 10 kΩ.
  • Pin 6 is tied to 3.3V on 8 of 8 designs.
  • Pin 6 has a decoupling capacitor on 8 of 8 designs.
  • Pin 8 is tied to 1.8V on 8 of 8 designs.
Pin 5Connected to: Signal 88%
  • Pull-up to 3.3V on 75% · 10 kΩ (6)
  • Resistor to GND on 75% · 10 kΩ (6)
  • Crystal on 75% · 10 MHz (6)
Pin 6Connected to: 3.3V 100%
  • Decoupling capacitor on 100%
Pin 7Connected to: MAX-M8 75%
  • Resistor to GND on 75% · 100 kΩ (6)
Pin 8Connected to: 1.8V 100%
  • Decoupling capacitor on 100%
Pin 23Connected to: 3.3V 100%
  • Decoupling capacitor on 100%
Pin 38Connected to: A connector 100%
  • Resistor to GND on 88% · 10 kΩ (6)
Pin 39Connected to: 1.8V 100%
  • Decoupling capacitor on 100%
Pin 41Connected to: 1.8V 100%
  • Decoupling capacitor on 100%
Pin 57Connected to: 1.8V 100%
  • Decoupling capacitor on 100%
Pin 65Connected to: GND 100%

55 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Portapack havoc modified by jamesshao8, Portapack carnage by Acetolyne, PortaPack H1 by Josephrp and Portapack hackrf one by dronefpgabasedarchitecture-pizza.

The 5M40ZE64 in open source designs

The gallery holds 8 open source boards using the 5M40ZE64 from 8 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 108 components.

75% carry an open source license.

The most starred is Portapack havoc modified by jamesshao8.

What boards using the 5M40ZE64 are built for

5M40ZE64: common questions

Where can I find a 5M40ZE64 reference design?

Each of the 8 boards on this page is a real design using the 5M40ZE64. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 5M40ZE64 pin 38?

Pin 38 has a resistor to GND on 7 of 8 designs, most often 10 kΩ. Counted from the KiCad layouts of 8 open source designs using the 5M40ZE64.

How is the 5M40ZE64 pin 6 connected?

Pin 6 is tied to 3.3V on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the 5M40ZE64.

How is the 5M40ZE64 pin 8 connected?

Pin 8 is tied to 1.8V on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the 5M40ZE64.

What parts are used alongside the 5M40ZE64?

The AK4951EN, CAT4004[_AB], NUF4220MN, 74HC1G04GW and BQ24075RGT appear in the most repositories here.

How big is a typical board using the 5M40ZE64?

The median is 120 × 75 mm.

What is the most popular open source board using the 5M40ZE64?

By GitHub stars, Portapack havoc modified by jamesshao8, with 186 stars.

Can I simulate one of these boards using the 5M40ZE64 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part