4 open source boards using the REGULATOR_SOT23_5

Real designs built with the REGULATOR_SOT23_5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The REGULATOR_SOT23_5 in open source designs

The gallery holds 4 open source boards using the REGULATOR_SOT23_5 from 3 GitHub repositories; a typical one measures about 106.8 × 75 mm and carries around 78 components.

100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is Portapack hackrf one by dronefpgabasedarchitecture-pizza.

Parts used alongside the REGULATOR_SOT23_5

What boards using the REGULATOR_SOT23_5 are built for

REGULATOR_SOT23_5: common questions

Where can I find a REGULATOR_SOT23_5 reference design?

Each of the 4 boards on this page is a real design using the REGULATOR_SOT23_5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the REGULATOR_SOT23_5?

The median is 106.8 × 75 mm, and 100% are two-layer designs.

What is the most popular open source board using the REGULATOR_SOT23_5?

By GitHub stars, Portapack hackrf one by dronefpgabasedarchitecture-pizza, with 7 stars.

Can I simulate one of these boards using the REGULATOR_SOT23_5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part