Dual 555 tone demonstrator routed
DsThakurRawat·PCB-AND-CHIP-DESIGN-WITH-AIML·end_exam/dual_555_tone_demonstrator_routed.kicad_pcb
About the Dual 555 tone demonstrator routed PCB
Dual 555 tone demonstrator routed is an open source PCB design by DsThakurRawat, published on GitHub. It is a 2-layer board measuring 90 × 70 mm, with 23 components from 13 distinct parts.
Other key parts include the NE555P. By type, the board carries 12 capacitors, 5 connectors, 3 resistors, 2 ICs and 1 diode.
From the project
An end-to-end open-source pipeline for programmatic circuit synthesis, schematic capture, SPICE simulation, PCB layout, automated routing, and manufacturing exports using KiCad 9, ngspice, FreeRouting, InteractiveHtmlBom, OpenCode, and Antigravity.
Main components on the Dual 555 tone demonstrator routed
Dual 555 tone demonstrator routed bill of materials (BOM)
23 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | NE555P | DIP-8_W7.62mm | U1, U2 |
| 1 | 9V_INPUT_J_PWR | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J1 |
| 1 | L_A_10mH | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | SPK_A_8R | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | L_B_10mH | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | SPK_B_8R | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | PWR_LED_GREEN | LED_D3.0mm | D1 |
| 1 | 100uF_16V | CP_Radial_D6.3mm_P2.50mm | C1 |
| 3 | 100nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C2, C6, C11 |
| 4 | 2.2uF | CP_Radial_D5.0mm_P2.00mm | C3, C4, C8, C9 |
| 4 | 10uF | CP_Radial_D5.0mm_P2.00mm | C5, C7, C10, C12 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 2 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
Dual 555 tone demonstrator routed design files
The KiCad project lives in the DsThakurRawat/PCB-AND-CHIP-DESIGN-WITH-AIML repository on GitHub; these links point at the commit this page was built from.
Dual 555 tone demonstrator routed: common questions
How big is the Dual 555 tone demonstrator routed PCB?
The Dual 555 tone demonstrator routed measures 90 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dual 555 tone demonstrator routed?
23 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dual 555 tone demonstrator routed design files?
From the DsThakurRawat/PCB-AND-CHIP-DESIGN-WITH-AIML repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Dual 555 tone demonstrator routed design in my own project?
The repository has no license, so all rights stay with DsThakurRawat. Use it as a reference, and ask the author before reusing the design.
More boards in PCB-AND-CHIP-DESIGN-WITH-AIML
STM32
STM32F4 4-Layer Development Board
DsThakurRawat
59.5 × 58.6 mm46 parts4LNo license0STM32
Stm32 water pump controller
DsThakurRawat
85 × 65 mm41 parts2LNo license0STM32
Stm32 water pump controller routed
DsThakurRawat
85 × 65 mm41 parts2LNo license0Dual 555 tone demonstrator
DsThakurRawat
90 × 70 mm29 parts2LNo license0Unrouted routed
DsThakurRawat
48 × 36 mm9 parts2LNo license0Unrouted
DsThakurRawat
48 × 36 mm9 parts2LNo license0Ne555 led blinker
DsThakurRawat
48 × 36 mm9 parts2LNo license0Test single layer routed
DsThakurRawat
48 × 36 mm9 parts2LNo license0Ne555 led blinker routed
DsThakurRawat
48 × 36 mm9 parts2LNo license0