Stm32 water pump controller
DsThakurRawat·PCB-AND-CHIP-DESIGN-WITH-AIML·stm32_water_pump_controller/stm32_water_pump_controller.kicad_pcb
About the Stm32 water pump controller PCB
Stm32 water pump controller is an open source STM32 PCB design by DsThakurRawat, published on GitHub. It is a 2-layer board measuring 85 × 65 mm, with 41 components from 37 distinct parts.
Its main chip is the MP2359DJ-LF-Z, from the STM32 family. Other key parts include the STM32F405RGT6. By type, the board carries 13 capacitors, 11 resistors, 6 diodes, 4 connectors, 2 ICs and 2 crystals.
From the project
An end-to-end open-source pipeline for programmatic circuit synthesis, schematic capture, SPICE simulation, PCB layout, automated routing, and manufacturing exports using KiCad 9, ngspice, FreeRouting, InteractiveHtmlBom, OpenCode, and Antigravity.
Main components on the Stm32 water pump controller
Stm32 water pump controller bill of materials (BOM)
41 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP2359DJ-LF-Z STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | STM32F405RGT6 AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | AO3401A AO3400A | SOT-23 | Q1 |
| 1 | 16MHZ 8MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | SCREW_TERMINAL_01X02 12V_DC_IN | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | SOIL_SENSOR | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | CONN_01X04 PUMP_TERMINAL | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | CONN_01X04 SWD_PROG | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | SW_RESET | SW_PUSH_6mm | SW1 |
| 1 | SW_OVERRIDE | SW_PUSH_6mm | SW2 |
| 2 | B5819W SS34 | D_SMA | D1, D2 |
| 1 | C2286 LED_PWR | LED_0805_2012Metric | D3 |
| 1 | C72041 LED_PUMP | LED_0805_2012Metric | D4 |
| 1 | LED_WARN | LED_0805_2012Metric | D5 |
| 1 | LED_STATUS | LED_0805_2012Metric | D6 |
| 1 | 10U 100uF | CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 10U 10uF | C_0805_2012Metric | C2 |
| 1 | 10U 22uF | C_0805_2012Metric | C3 |
| 1 | 10N 100nF | C_0805_2012Metric | C4 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4U7 100nF | C_0805_2012Metric | C5 |
| 3 | 100N 100nF | C_0805_2012Metric | C6, C7, C8 |
| 2 | 100N 20pF | C_0805_2012Metric | C9, C10 |
| 1 | 12pF | C_0805_2012Metric | C11 |
| 1 | 10N 12pF | C_0805_2012Metric | C12 |
| 1 | 2U2 100nF | C_0805_2012Metric | C13 |
| 1 | 100K 1k | R_0805_2012Metric | R1 |
| 1 | 68K 1k | R_0805_2012Metric | R2 |
| 1 | 47K 1k | R_0805_2012Metric | R3 |
| 1 | 15K 1k | R_0805_2012Metric | R4 |
| 1 | 270 10k | R_0805_2012Metric | R5 |
| 1 | 10k | R_0805_2012Metric | R6 |
| 1 | 10K 10k | R_0805_2012Metric | R7 |
| 1 | 100R | R_0805_2012Metric | R8 |
| 1 | 1K5 10k | R_0805_2012Metric | R9 |
| 1 | 2K2 1k | R_0805_2012Metric | R10 |
| 1 | 2K2 10k | R_0805_2012Metric | R11 |
Stm32 water pump controller design files
The KiCad project lives in the DsThakurRawat/PCB-AND-CHIP-DESIGN-WITH-AIML repository on GitHub; these links point at the commit this page was built from.
Stm32 water pump controller: common questions
What microcontroller does the Stm32 water pump controller use?
The Stm32 water pump controller is built around the MP2359DJ-LF-Z, from the STM32 family.
How big is the Stm32 water pump controller PCB?
The Stm32 water pump controller measures 85 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stm32 water pump controller?
41 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stm32 water pump controller design files?
From the DsThakurRawat/PCB-AND-CHIP-DESIGN-WITH-AIML repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stm32 water pump controller design in my own project?
The repository has no license, so all rights stay with DsThakurRawat. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32 water pump controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in PCB-AND-CHIP-DESIGN-WITH-AIML
STM32
STM32F4 4-Layer Development Board
DsThakurRawat
59.5 × 58.6 mm46 parts4LNo license0STM32
Stm32 water pump controller routed
DsThakurRawat
85 × 65 mm41 parts2LNo license0Dual 555 tone demonstrator
DsThakurRawat
90 × 70 mm29 parts2LNo license0Dual 555 tone demonstrator routed
DsThakurRawat
90 × 70 mm23 parts2LNo license0Unrouted routed
DsThakurRawat
48 × 36 mm9 parts2LNo license0Unrouted
DsThakurRawat
48 × 36 mm9 parts2LNo license0Ne555 led blinker
DsThakurRawat
48 × 36 mm9 parts2LNo license0Test single layer routed
DsThakurRawat
48 × 36 mm9 parts2LNo license0Ne555 led blinker routed
DsThakurRawat
48 × 36 mm9 parts2LNo license0
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k