Test single layer routed
DsThakurRawat·PCB-AND-CHIP-DESIGN-WITH-AIML·ne555_led_blinker/test_single_layer_routed.kicad_pcb
About the Test single layer routed PCB
Test single layer routed is an open source PCB design by DsThakurRawat, published on GitHub. It is a 2-layer board measuring 48 × 36 mm, with 9 components from 9 distinct parts.
Other key parts include the MP2359DJ-LF-Z. By type, the board carries 3 capacitors, 3 resistors, 1 IC, 1 connector and 1 diode.
From the project
An end-to-end open-source pipeline for programmatic circuit synthesis, schematic capture, SPICE simulation, PCB layout, automated routing, and manufacturing exports using KiCad 9, ngspice, FreeRouting, InteractiveHtmlBom, OpenCode, and Antigravity.
Main components on the Test single layer routed
Test single layer routed bill of materials (BOM)
9 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP2359DJ-LF-Z NE555P | DIP-8_W7.62mm | U1 |
| 1 | SCREW_TERMINAL_01X02 5V_IN | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | B5819W LED_RED | LED_D5.0mm | D1 |
| 1 | 10U 10uF | CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 10U 10nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 10U 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 100K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 68K 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 47K 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
Test single layer routed design files
The KiCad project lives in the DsThakurRawat/PCB-AND-CHIP-DESIGN-WITH-AIML repository on GitHub; these links point at the commit this page was built from.
Test single layer routed: common questions
How big is the Test single layer routed PCB?
The Test single layer routed measures 48 × 36 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Test single layer routed?
9 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Test single layer routed design files?
From the DsThakurRawat/PCB-AND-CHIP-DESIGN-WITH-AIML repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Test single layer routed design in my own project?
The repository has no license, so all rights stay with DsThakurRawat. Use it as a reference, and ask the author before reusing the design.
More boards in PCB-AND-CHIP-DESIGN-WITH-AIML
STM32
STM32F4 4-Layer Development Board
DsThakurRawat
59.5 × 58.6 mm46 parts4LNo license0STM32
Stm32 water pump controller
DsThakurRawat
85 × 65 mm41 parts2LNo license0STM32
Stm32 water pump controller routed
DsThakurRawat
85 × 65 mm41 parts2LNo license0Dual 555 tone demonstrator
DsThakurRawat
90 × 70 mm29 parts2LNo license0Dual 555 tone demonstrator routed
DsThakurRawat
90 × 70 mm23 parts2LNo license0Ne555 led blinker
DsThakurRawat
48 × 36 mm9 parts2LNo license0Ne555 led blinker routed
DsThakurRawat
48 × 36 mm9 parts2LNo license0Unrouted routed
DsThakurRawat
48 × 36 mm9 parts2LNo license0Unrouted
DsThakurRawat
48 × 36 mm9 parts2LNo license0