Ne555 led blinker

DsThakurRawat·PCB-AND-CHIP-DESIGN-WITH-AIML·ne555_led_blinker/ne555_led_blinker.kicad_pcb

Ne555 led blinker PCB layout, top view — open source board by DsThakurRawat

About the Ne555 led blinker PCB

Ne555 led blinker is an open source PCB design by DsThakurRawat, published on GitHub. It is a 2-layer board measuring 48 × 36 mm, with 9 components from 9 distinct parts.

Other key parts include the MP2359DJ-LF-Z. By type, the board carries 3 capacitors, 3 resistors, 1 IC, 1 connector and 1 diode.

From the project

An end-to-end open-source pipeline for programmatic circuit synthesis, schematic capture, SPICE simulation, PCB layout, automated routing, and manufacturing exports using KiCad 9, ngspice, FreeRouting, InteractiveHtmlBom, OpenCode, and Antigravity.

Main components on the Ne555 led blinker

Ne555 led blinker bill of materials (BOM)

9 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MP2359DJ-LF-Z
NE555P
U1
1
SCREW_TERMINAL_01X02
5V_GND
J1
1
B5819W
LED_RED
D1
1
10U
10uF
C1
1
10U
10nF
C2
1
10U
100nF
C3
1
100K
10k
R1
1
68K
100k
R2
1
47K
1k
R3

Ne555 led blinker design files

The KiCad project lives in the DsThakurRawat/PCB-AND-CHIP-DESIGN-WITH-AIML repository on GitHub; these links point at the commit this page was built from.

Ne555 led blinker: common questions

How big is the Ne555 led blinker PCB?

The Ne555 led blinker measures 48 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ne555 led blinker?

9 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ne555 led blinker design files?

From the DsThakurRawat/PCB-AND-CHIP-DESIGN-WITH-AIML repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ne555 led blinker design in my own project?

The repository has no license, so all rights stay with DsThakurRawat. Use it as a reference, and ask the author before reusing the design.

More boards in PCB-AND-CHIP-DESIGN-WITH-AIML