HardLabs

Smart compass

durki007·smart-compass·hardware/compass-final/compass-final.kicad_pcb

This repository ships a schematic but no board layout.

About the Smart compass PCB

Smart compass is an open source ESP32 PCB design by durki007, published on GitHub. It is a 2-layer board, with 4 components from 4 distinct parts.

Its main chip is the ESP32-DevKitC, from the ESP32 family.

From the project

Inteligentne urządzenie do nawigacji.

Celem projektu było zaprojektowanie urządzenia elektronicznego, działającego w trybie autonomicznym, pozwalającego na nawigację po prostej trasie składającej się z dowolnej liczby kolejnych punktów.

Main components on the Smart compass

ESP32-DevKitC

Smart compass bill of materials (BOM)

4 components, 4 distinct parts.

QtyPartRefs
1
ESP32-DevKitC
U1
1
QMC5883
GY-1
1
GY-NEO6MV2
GY-NEO6MV1
1
1.8inch LCD Module
LCD1

Smart compass design files

The KiCad project lives in the durki007/smart-compass repository on GitHub; these links point at the commit this page was built from.

Smart compass: common questions

What microcontroller does the Smart compass use?

The Smart compass is built around the ESP32-DevKitC, from the ESP32 family.

How big is the Smart compass PCB?

The Smart compass has 2 copper layers and is 1.6 mm thick.

How many components are on the Smart compass?

4 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Smart compass design files?

From the durki007/smart-compass repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Smart compass design in my own project?

The repository has no license, so all rights stay with durki007. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Smart compass without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards