CapacitorCharger100V
About the CapacitorCharger100V PCB
CapacitorCharger100V is an open source PCB design by DVA490-474-Project-Course, published on GitHub under the MIT license. It is a 2-layer board measuring 108 × 40.5 mm, with 30 components from 25 distinct parts.
Other key parts include the LT3751IFE#PBF. By type, the board carries 14 resistors, 10 capacitors, 2 connectors, 1 IC, 1 module and 1 transformer.
From the project
Contains all hardware related material. (No software).
This folder contains all circuitry and PCB design for the robot.
Main components on the CapacitorCharger100V
CapacitorCharger100V bill of materials (BOM)
30 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT3751IFE#PBF | SOP65P640X120-21N | IC1 |
| 1 | NMOS | TO-263-3_TabPin2 | M1 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | DA2034-ALD | SOP300P3000X1143-12N | T1 |
| 1 | US1M | D_SMA | D1 |
| 1 | 865080562017 680 uF (865080562017) | CAPAE1350X1400N | C1 |
| 1 | 885342206006 885342206006 (10000 pF) | CAPC1608X87N | C2 |
| 2 | 2.2uF | C_1210_3225Metric | C2.1, C2.2 |
| 3 | 2.2u | C_1210_3225Metric | C2.3, C2.4, C2.5 |
| 1 | 885012209073 10uF (885012209073) | C_1210_3225Metric | C3 |
| 1 | 100N WCAP-AIG8_30X46 | WCAP-AIG8_30X46_DXL_ | C4 |
| 1 | CKG57NX7R2J474M500JH | CAPC6050X550N | C5 |
| 2 | 1.8k | R_0603_1608Metric | R1.1, R3.1 |
| 2 | 68k | R_1206_3216Metric | R1.2, R3.2 |
| 1 | 475k | R_0603_1608Metric | R2 |
| 1 | 40.2k | R_0603_1608Metric | R3 |
| 1 | 1K5 475k | R_0603_1608Metric | R4 |
| 1 | 6m | R_0805_2012Metric | R5 |
| 1 | 200 | R_0805_2012Metric | R7.1 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 18k | R_0603_1608Metric | R7.2 |
| 1 | 4K87 40.2k | R_0603_1608Metric | R8 |
| 1 | 4.02k | R_0603_1608Metric | R9 |
| 1 | 30.9k | R_1206_3216Metric | R10 |
| 1 | 383 | R_1206_3216Metric | R11 |
CapacitorCharger100V design files
The KiCad project lives in the DVA490-474-Project-Course/SSL-Hardware-Development repository on GitHub; these links point at the commit this page was built from.
CapacitorCharger100V: common questions
How big is the CapacitorCharger100V PCB?
The CapacitorCharger100V measures 108 × 40.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CapacitorCharger100V?
30 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CapacitorCharger100V design files?
From the DVA490-474-Project-Course/SSL-Hardware-Development repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CapacitorCharger100V design in my own project?
Yes, under the terms of its MIT license, which DVA490-474-Project-Course chose for the repository.
More boards in SSL-Hardware-Development
Powerboard v1
90 × 80 mm372 parts4LMIT0
STM32Base Station v3b
58 × 85 mm130 parts4LMIT0
STM32Mainboard v13
80 × 85 mm118 parts4LMIT0
Kicker Capacitor Charger V1
121 × 49 mm30 parts2LMIT0
MotorDriverCarrier
38.2 × 58.4 mm17 parts4LMIT0
MotorDriverCarrier rounded
38.2 × 58.4 mm17 parts4LMIT0
Kicker Control Circuit
38.5 × 33 mm14 parts2LMIT0
Encoder
15 × 16.3 mm7 parts2LMIT0