HardLabs

Encoder

DVA490-474-Project-Course·SSL-Hardware-Development·Circuits/Encoder_PCB/Encoder_PCB.kicad_pcb

Encoder PCB layout, top view — open source board by DVA490-474-Project-Course

About the Encoder PCB

Encoder is an open source PCB design by DVA490-474-Project-Course, published on GitHub under the MIT license. It is a 2-layer board measuring 15 × 16.3 mm, with 7 components from 6 distinct parts.

Other key parts include the 74LVC1G125DBV. By type, the board carries 4 resistors, 1 IC, 1 connector and 1 capacitor.

From the project

Contains all hardware related material. (No software).

This folder contains all circuitry and PCB design for the robot.

Main components on the Encoder

74LVC1G125DBV

Encoder bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
74LVC1G125DBV
iC-PX2604
IC1
1
Conn_01x04_Socket
J1
1
100N
100n
C1
1
0R
R1
2
N/A
R2, R3
1
1K5
N/A
R4

Encoder design files

The KiCad project lives in the DVA490-474-Project-Course/SSL-Hardware-Development repository on GitHub; these links point at the commit this page was built from.

Encoder: common questions

How big is the Encoder PCB?

The Encoder measures 15 × 16.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Encoder?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Encoder design files?

From the DVA490-474-Project-Course/SSL-Hardware-Development repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Encoder design in my own project?

Yes, under the terms of its MIT license, which DVA490-474-Project-Course chose for the repository.

More boards in SSL-Hardware-Development