MotorDriverCarrier rounded
About the MotorDriverCarrier rounded PCB
MotorDriverCarrier rounded is an open source PCB design by DVA490-474-Project-Course, published on GitHub under the MIT license. It is a 4-layer board measuring 38.2 × 58.4 mm, with 17 components from 14 distinct parts.
Other key parts include the UA9637. By type, the board carries 7 connectors, 3 diodes, 3 resistors, 2 jumpers, 1 IC and 1 capacitor.
It belongs with the robotics & motion designs in this gallery.
From the project
Contains all hardware related material. (No software).
This folder contains all circuitry and PCB design for the robot.
Main components on the MotorDriverCarrier rounded
MotorDriverCarrier rounded bill of materials (BOM)
17 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | UA9637 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Edge_PROG | CustomEdge_PROG | J1 |
| 1 | Driver_Encoder | PinHeader_1x05_P2.00mm_Vertical | J2 |
| 1 | Edge_Motor | CustomEdge_Motor3_Single | J10 |
| 1 | Edge_Power | CustomEdge_Power2 | J11 |
| 1 | Edge_UART | CustomEdge_UART5 | J13 |
| 1 | Edge_CAN | CustomEdge_CAN4 | J14 |
| 1 | Main Connector | BUS_PCIexpress_x4 | J15 |
| 1 | Jumper_2_Bridged | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | Jumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2 |
| 3 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3 |
| 1 | 100N 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 2 | 1k5 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 11k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
MotorDriverCarrier rounded design files
The KiCad project lives in the DVA490-474-Project-Course/SSL-Hardware-Development repository on GitHub; these links point at the commit this page was built from.
MotorDriverCarrier rounded: common questions
How big is the MotorDriverCarrier rounded PCB?
The MotorDriverCarrier rounded measures 38.2 × 58.4 mm, has 4 copper layers and is 1.599998 mm thick.
How many components are on the MotorDriverCarrier rounded?
17 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MotorDriverCarrier rounded design files?
From the DVA490-474-Project-Course/SSL-Hardware-Development repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the MotorDriverCarrier rounded design in my own project?
Yes, under the terms of its MIT license, which DVA490-474-Project-Course chose for the repository.
More boards in SSL-Hardware-Development
Powerboard v1
90 × 80 mm372 parts4LMIT0
STM32Base Station v3b
58 × 85 mm130 parts4LMIT0
STM32Mainboard v13
80 × 85 mm118 parts4LMIT0
Kicker Capacitor Charger V1
121 × 49 mm30 parts2LMIT0
CapacitorCharger100V
108 × 40.5 mm30 parts2LMIT0
MotorDriverCarrier
38.2 × 58.4 mm17 parts4LMIT0
Kicker Control Circuit
38.5 × 33 mm14 parts2LMIT0
Encoder
15 × 16.3 mm7 parts2LMIT0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979