Neuron
Dygmalab·neuron
About the Neuron PCB
Neuron is an open source Microchip SAM PCB design by Dygmalab, published on GitHub under the CERN-OHL-1.2 license. It is a 4-layer board measuring 23.4 × 28.4 mm, with 62 components from 22 distinct parts.
Its main chip is the samd21g, from the Microchip SAM family. Other key parts include the usblc6-4, LY2508 and 4 pin RGB led, com anode. By type, the board carries 15 test points, 14 capacitors, 14 resistors, 4 ICs, 4 transistors and 4 diodes.
It belongs with the usb & debug tools designs in this gallery.
Main components on the Neuron
Neuron bill of materials (BOM)
62 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | usblc6-4 | SOT-23-6 | U1 |
| 1 | LY2508 | SOT-23 | U2 |
| 1 | samd21g | QFN-48-1EP_7x7mm_Pitch0.5mm | U3 |
| 1 | 4 pin RGB led, com anode | 3528-4p | U4 |
| 1 | PMOS, -3.6A, 0.02R | SOT-23 | Q1 |
| 3 | Q_NMOS_GSD 1Amp | SOT-323_SC-70 | Q2, Q3, Q4 |
| 1 | 32.768khz | Crystal_SMD_3215-2pin_3.2x1.5mm | Y1 |
| 3 | USB_C_Receptacle_16pin | usb-c-16smt | J1, J2, J3 |
| 1 | SW_Push | reset-button | SW1 |
| 15 | TEST | testpoint | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +7 |
| 4 | ESD-diode | sod882 | D1, D2, D3, D4 |
| 2 | inductor 470R at 100M, 1A | R_0603 | L1, L2 |
| 5 | 1uF, ceramic, 10v, 10%, x5r | C_0603 | C1, C4, C5, C6, C9 |
| 2 | 20pF, ceramic, 100v, 5% | C_0603 | C2, C3 |
| 2 | 10uF, ceramic, 10v, 10%, x5r | C_0603 | C7, C8 |
| 5 | 100pF ceramic, 100v, 10% | C_0603 | C10, C11, C12, C13, C14 |
| 2 | 10k, 125mW, 5% | R_0603 | R1, R2 |
| 4 | 2.7k, 125mW, 5% | R_0603 | R3, R4, R13, R14 |
| 3 | 5.1k, 125mW, 5% | R_0603 | R5, R6, R7 |
| 1 | 180R, 125mW, 5% | R_0603 | R8 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 42.2R, 125mW, 5% | R_0603 | R9, R10 |
| 2 | 200k, 125mW, 5% | R_0603 | R11, R12 |
Neuron design files
The KiCad project lives in the Dygmalab/neuron repository on GitHub; these links point at the commit this page was built from.
- Layoutusb-hub.kicad_pcb
Neuron: common questions
What microcontroller does the Neuron use?
The Neuron is built around the samd21g, from the Microchip SAM family.
How big is the Neuron PCB?
The Neuron measures 23.4 × 28.4 mm, has 4 copper layers and is 0.8 mm thick.
How many components are on the Neuron?
62 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Neuron design files?
From the Dygmalab/neuron repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Neuron design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which Dygmalab chose for the repository.
Can I test firmware for the Neuron without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416