Light remote controller HW
About the Light remote controller HW PCB
Light remote controller HW is an open source ESP8266 PCB design by easilok, published on GitHub. It is a 2-layer board measuring 86.3 × 48.5 mm, with 34 components from 11 distinct parts.
Its main chip is the WeMos_D1_mini, from the ESP8266 family. Other key parts include the NodeMCU_ESP12E and PCF8574. By type, the board carries 15 resistors, 14 connectors, 4 ICs and 1 diode.
Main components on the Light remote controller HW
Light remote controller HW bill of materials (BOM)
34 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NodeMCU_ESP12E | NodeMCU1.0_12-E | U1 |
| 1 | WeMos_D1_mini | WEMOS_D1_mini_light | U2 |
| 2 | PCF8574 | DIP-16_W7.62mm_Socket_LongPads | U3, U4 |
| 1 | Conn_01x10_Female | PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | Conn_01x03_Female | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 10 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J3, J4, J5, J6, J7, J8, J9, J10 +2 |
| 1 | Conn_01x02_Female | PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | Screen | TerminalBlock_bornier-4_P5.08mm | J13 |
| 1 | LED | LED_D3.0mm | D1 |
| 7 | 10K | R_0805_2012Metric | R1, R2, R3, R4, R7, R16, R17 |
| 8 | 100K | R_0805_2012Metric | R8, R9, R10, R11, R12, R13, R14, R15 |
Light remote controller HW design files
The KiCad project lives in the easilok/light_remote_controller_HW repository on GitHub; these links point at the commit this page was built from.
Light remote controller HW: common questions
What microcontroller does the Light remote controller HW use?
The Light remote controller HW is built around the WeMos_D1_mini, from the ESP8266 family.
How big is the Light remote controller HW PCB?
The Light remote controller HW measures 86.3 × 48.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Light remote controller HW?
34 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Light remote controller HW design files?
From the easilok/light_remote_controller_HW repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Light remote controller HW design in my own project?
The repository has no license, so all rights stay with easilok. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Light remote controller HW without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398