Elec carte neuroboard s3
ECE-Ecole-Ingenieurs·elec-carte-neuroboard-s3·pcb/kicad/ece_neuroboard_s3.kicad_pcb
About the Elec carte neuroboard s3 PCB
Elec carte neuroboard s3 is an open source ESP32 PCB design by ECE-Ecole-Ingenieurs, published on GitHub. It is a 4-layer board measuring 26 × 63 mm, with 59 components from 21 distinct parts.
Its main chip is the WIRELM-SMD_ESP32-S3-WROOM-1, from the ESP32 family. By type, the board carries 19 capacitors, 18 resistors, 7 diodes, 6 ICs, 2 switches and 2 LEDs.
It belongs with the iot & wireless, dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
Dépot des fichiers PCB, 3D et firmware pour la carte NeuroBoard S3
A compact development board based (dual row available on breadboard) on the ESP32-S3-WROOM-1-N16R8, designed for ECE engineering students. It exposes a 24-pin FPC camera connector with a dedicated 1.5 V supply, native USB (no driver required), an addressable RGB LED, a microSD slot, and dual 22-pin expansion headers.
The board uses the ESP32-S3 native USB port (GPIO 19 = D−, GPIO 20 = D+). No USB-to-UART chip is required, and no driver installation is needed on Windows 10+, macOS, or Linux.
Elec carte neuroboard s3 bill of materials (BOM)
59 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | — ESPRESSIF(乐鑫) | WIRELM-SMD_ESP32-S3-WROOM-1 | U1 |
| 1 | — UMW(友台半导体) | SOT-23-5_L3.0-W1.5-P0.95-LS2.8-BL | U2 |
| 1 | — DIODES(美台) | SOT-223_L6.5-W3.5-P2.30-LS7.0-BR | U3 |
| 1 | — BOURNS | F1206 | U4 |
| 2 | — MICRONE(南京微盟) | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U5, U6 |
| 1 | — SHOU HAN(首韩) | TF-SMD_TF-PUSH | CARD1 |
| 1 | — XUNPU(讯普) | FPC-SMD_24P-P0.50_FPC-05F-24PH20 | FPC2 |
| 2 | — Ckmtw(灿科盟) | HDR-TH_22P-P2.54-V-M | H1, H2 |
| 2 | — XUNPU(讯普) | SW-SMD_L3.9-W3.0-P4.45 | SW1, SW2 |
| 1 | — SHOU HAN(首韩) | USB-C-SMD_TYPE-C16PIN | USB1 |
| 1 | — KENTO | LED0603-RD | LED1 |
| 1 | — 欧思科光电 | LED-SMD_4P-L2.0-W2.0-BR | LED2 |
| 3 | — LRC(乐山无线电) | SOD-882_L1.0-W0.6-BI | D1, D2, D3 |
| 1 | — TECH PUBLIC(台舟) | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | D4 |
| 1 | — R+O(宏嘉诚) | SOD-123FL_L2.7-W1.8-LS3.8-RD | D5 |
| 2 | — CJ(江苏长电/长晶) | SOD-123_L2.8-W1.8-LS3.7-RD-2 | D6, D7 |
| 8 | — YAGEO(国巨) | C0603 | C1, C2, C4, C6, C8, C15, C17, C19 |
| 10 | — muRata(村田) | C0805 | C3, C5, C7, C9, C10, C12, C13, C14 +2 |
| 1 | — muRata(村田) | C1206 | C11 |
| 16 | — UNI-ROYAL(厚声) | R0603 | R1, R2, R3, R4, R5, R6, R7, R10 +8 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | — UNI-ROYAL(厚声) | R0402 | R8, R9 |
Elec carte neuroboard s3 design files
The KiCad project lives in the ECE-Ecole-Ingenieurs/elec-carte-neuroboard-s3 repository on GitHub; these links point at the commit this page was built from.
Elec carte neuroboard s3: common questions
What microcontroller does the Elec carte neuroboard s3 use?
The Elec carte neuroboard s3 is built around the WIRELM-SMD_ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Elec carte neuroboard s3 PCB?
The Elec carte neuroboard s3 measures 26 × 63 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Elec carte neuroboard s3?
59 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Elec carte neuroboard s3 design files?
From the ECE-Ecole-Ingenieurs/elec-carte-neuroboard-s3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Elec carte neuroboard s3 design in my own project?
The repository has no license, so all rights stay with ECE-Ecole-Ingenieurs. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Elec carte neuroboard s3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k