HardLabs

A Team ECE411 OLD VER

eceteresa·ECE-411-FA25·Illuminoti-board/A_Team_ECE411_OLD_VER.kicad_pcb

A Team ECE411 OLD VER PCB layout, top view — open source ESP32 board by eceteresa

About the A Team ECE411 OLD VER PCB

A Team ECE411 OLD VER is an open source ESP32 PCB design by eceteresa, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 72.7 × 42 mm, with 10 components from 10 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the 4654, 2809 and CEG006900. By type, the board carries 4 ICs, 3 resistors, 2 capacitors and 1 inductor.

From the project

Baby's First Capstone! Housing all things that is our project.

Here are the basic programs you'll need to have on your computer in order to interface with the projects:

- VSCode: A helpful all-in-one programming IDE. Free! - You can install the PlatformIO extension and code .ino directly into the IDE! - Arduino IDE: If you would rather not use VSCode. - Github: Not required, but strongly recommended for ease of file sharing between machines. You can even work from your repo within VSCode using git bash!

Main components on the A Team ECE411 OLD VER

4654ESP32-S3-WROOM-12809CEG006900

A Team ECE411 OLD VER bill of materials (BOM)

10 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
4654
TPS61023_Boost_Converter
IC1
1
ESP32-S3-WROOM-1
U1
1
2809
LIS3DH_Accelerator
U2
1
CEG006900
RF522_RFID
U3
1
1u
L1
1
399-15735-2
10u
C1
1
581-KGM31AR71A226MU
44u
C2
1
10k
R1
1
732k
R2
1
100k
R3

A Team ECE411 OLD VER design files

The KiCad project lives in the eceteresa/ECE-411-FA25 repository on GitHub; these links point at the commit this page was built from.

A Team ECE411 OLD VER: common questions

What microcontroller does the A Team ECE411 OLD VER use?

The A Team ECE411 OLD VER is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the A Team ECE411 OLD VER PCB?

The A Team ECE411 OLD VER measures 72.7 × 42 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the A Team ECE411 OLD VER?

10 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the A Team ECE411 OLD VER design files?

From the eceteresa/ECE-411-FA25 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the A Team ECE411 OLD VER design in my own project?

Yes, under the terms of its GPL-3.0 license, which eceteresa chose for the repository.

Can I test firmware for the A Team ECE411 OLD VER without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ECE-411-FA25

Similar boards