NomobotSK
edantoni96·NomobotSK
About the NomobotSK PCB
NomobotSK is an open source PCB design by edantoni96, published on GitHub. It is a 2-layer board measuring 106.7 × 107.5 mm, with 66 components from 28 distinct parts.
Other key parts include the L293D, TP4056 Module, TCRT5000, HC-SR04 and AMS1117-3.3. By type, the board carries 18 diodes, 13 resistors, 9 capacitors, 7 ICs, 6 connectors and 6 switches.
It belongs with the robotics & motion designs in this gallery.
From the project
NomobotSK is a educational robot for kids to learn programming and robotics.
NomobotSK is a educational robot for kids to learn programming and robotics.
To test the device you can use the under tester/TEST.ino
D1; Trig / Servo R D2; Tombol 2 D3; Tombol 3 D4; DIR2 (-) D5; DIR2 (+) D6; DIR1 (-) D7; DIR1 (+) D8; LED / Garis L D0; BUZZ / Garis R
Catatan: Simbol / berarti setiap fungsi perlu diuji atau digunakan secara terpisah.
1. TESTLED 2. TESTBUZ 3. TESTBUTTON 4. TESTM1 5. TESTM2 6. TESTULRA 7. TEST_LINE

Main components on the NomobotSK
NomobotSK bill of materials (BOM)
66 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L293D | DIP-16_W7.62mm | U1 |
| 1 | TP4056 Module | TP4056_Module | U2 |
| 2 | TCRT5000 | OPTO_TCRT5000 | U3, U4 |
| 1 | HC-SR04 | XCVR_HC-SR04 | U5 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U6 |
| 1 | LM393D | SOIC127P599X175-8N | U7 |
| 1 | NodeMCU V2 Amica | NodeMCU V2 Amica | A1 |
| 2 | Motor_DC | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | M1, M2 |
| 3 | Conn_01x12_Pin | PinHeader_1x12_P2.54mm_Vertical | J1, J5, J6 |
| 3 | Conn_01x03_Socket | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J2, J3, J4 |
| 1 | BH-18650-PC | BAT_BH-18650-PC | BT1 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 2 | Trimpot_10K | Potentiometer_Runtron_RM-065_Vertical | RV1, RV2 |
| 1 | SW_DIP_x01 | SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1 |
| 3 | SW_Push | SW_PUSH_6mm_H4.3mm | SW2, SW3, SW4 |
| 1 | SW_DIP_x10 | SW_DIP_SPSTx10_Slide_9.78x27.58mm_W7.62mm_P2.54mm | SW5 |
| 1 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW6 |
| 16 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
| 2 | LED_Green | LED_0805_2012Metric | D17, D18 |
| 2 | 1u | C_0805_2012Metric | C1, C8 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 100n | C_0805_2012Metric | C2, C3, C4, C5, C6 |
| 2 | C_Polarized | CP_Elec_6.3x5.3 | C7, C10 |
| 1 | 470R | R_0805_2012Metric | R1 |
| 2 | 220R | R_0805_2012Metric | R2, R3 |
| 5 | 10K | R_0805_2012Metric | R4, R5, R6, R7, R8 |
| 1 | 100R | R_0805_2012Metric | R9 |
| 2 | 330R | R_0805_2012Metric | R10, R11 |
| 2 | 1K | R_0805_2012Metric | R12, R13 |
NomobotSK design files
The KiCad project lives in the edantoni96/NomobotSK repository on GitHub; these links point at the commit this page was built from.
- LayoutNomobotSK.kicad_pcb
- SchematicNomobotSK.kicad_sch
NomobotSK: common questions
How big is the NomobotSK PCB?
The NomobotSK measures 106.7 × 107.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NomobotSK?
66 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the NomobotSK design files?
From the edantoni96/NomobotSK repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the NomobotSK design in my own project?
The repository has no license, so all rights stay with edantoni96. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979