Hog32a
edgecollective·hog32
About the Hog32a PCB
Hog32a is an open source ESP32 PCB design by edgecollective, published on GitHub. It is a 2-layer board measuring 3 × 3 mm, with 38 components from 27 distinct parts.
Its main chip is the ESP32-WROOM, from the ESP32 family. Other key parts include the RFM95HW. By type, the board carries 16 connectors, 8 resistors, 6 capacitors, 2 ICs, 2 transistors and 2 switches.
Main components on the Hog32a
Hog32a bill of materials (BOM)
38 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM | ESP32-WROOM | U1 |
| 1 | RFM95HW | RFM95 | U2 |
| 2 | Q_NPN_EBC | TO-92_Molded_Narrow | Q1, Q2 |
| 1 | REG:3V3 | Socket_Strip_Straight_1x03_Pitch2.54mm | J1 |
| 1 | prog | Pin_Header_Straight_1x07_Pitch2.54mm | J2 |
| 1 | VINS | TerminalBlock_Phoenix_PT-3.5mm_2pol | J3 |
| 1 | sdcard | Pin_Header_Straight_1x07_Pitch2.54mm | J4 |
| 1 | i2c-a | Pin_Header_Straight_1x04_Pitch2.54mm | J5 |
| 1 | REG:5V | Pin_Header_Straight_1x03_Pitch2.54mm | J6 |
| 1 | ANT | Pin_Header_Straight_1x01_Pitch2.54mm | J7 |
| 1 | 1wire | TerminalBlock_Phoenix_PT-3.5mm_3pol | J9 |
| 1 | Conn_01x07 | Pin_Header_Straight_1x07_Pitch2.54mm | J10 |
| 1 | Conn_01x16 | Pin_Header_Straight_1x16_Pitch2.54mm | J11 |
| 1 | dht22 | Pin_Header_Straight_1x04_Pitch2.54mm | J12 |
| 1 | 9602-a | Pin_Header_Straight_1x06_Pitch2.54mm | J13 |
| 1 | satx | Pin_Header_Straight_1x04_Pitch2.54mm | J14 |
| 1 | Conn_01x05 | TerminalBlock_Phoenix_PT-3.5mm_5pol | J15 |
| 1 | LBO | Pin_Header_Straight_2x03_Pitch2.54mm | J16 |
| 1 | 9602-b | Pin_Header_Straight_1x08_Pitch2.54mm | J19 |
| 2 | SW_Push | SW_PUSH_6mm | SW1, SW2 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | D | D_DO-201_P5.08mm_Vertical_AnodeUp | D1, D2 |
| 2 | 10 uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C5 |
| 2 | 22 uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C6 |
| 2 | 1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C3, C4 |
| 4 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1, R2, R3, R4 |
| 3 | 4.7K | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R5, R6, R7 |
| 1 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R8 |
Hog32a design files
The KiCad project lives in the edgecollective/hog32 repository on GitHub; these links point at the commit this page was built from.
- Layouthog32a.kicad_pcb
Hog32a: common questions
What microcontroller does the Hog32a use?
The Hog32a is built around the ESP32-WROOM, from the ESP32 family.
How big is the Hog32a PCB?
The Hog32a measures 3 × 3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hog32a?
38 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hog32a design files?
From the edgecollective/hog32 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Hog32a design in my own project?
The repository has no license, so all rights stay with edgecollective. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hog32a without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in hog32
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k