64 open source boards using the ESP32-WROOM

Real designs built with the ESP32-WROOM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

64 boardsClear filters|Most starred

How designs wire the ESP32-WROOM

Read from the KiCad layouts of 41 open source designs, one per repository: what each pin of the ESP32-WROOM connects to, and the resistors, capacitors and other passives placed on it.

  • The 3V3 pin is tied to 3.3V on 36 of 41 designs (not connected on 2, a signal on 2).
  • The SD3 pin is left unconnected on 36 of 38 designs (a signal on 2).
  • The CMD pin is left unconnected on 36 of 37 designs.
  • The SDO pin is left unconnected on 36 of 38 designs (a signal on 2).
GNDpin 1, 15, 38Connected to: GND 90%
3V3pin 2Connected to: 3.3V 88%
ENpin 3Connected to: A connector 25%
  • Pull-up to 3.3V on 60% · 10 kΩ (19), 12 kΩ (3), 180 Ω (1)
  • Capacitor to GND on 50% · 100 nF (11), 1 nF (3), 1 µF (2)
SENSOR_VPpin 4Connected to: Not connected 60% · a signal 40%
SENSOR_VNpin 5Connected to: Not connected 63% · a signal 34%
SD2pin 17Connected to: Not connected 87%
SD3pin 18Connected to: Not connected 95%
CMDpin 19Connected to: Not connected 97%
CLKpin 20Connected to: Not connected 92%
SDOpin 21Connected to: Not connected 95%
SD1pin 22Connected to: Not connected 95%
IO0pin 25Connected to: A connector 26%
  • Pull-up to 3.3V on 38% · 10 kΩ (11), 5.6 kΩ (1), 5 kΩ (1)
NCpin 32Connected to: Not connected 97%
RXD0pin 34Connected to: A connector 57%
  • Series resistor on 35% · 100 Ω (3), 1 kΩ (3), 470 Ω (2)
IO22pin 36Connected to: A connector 30% · not connected 27%
  • Pull-up to 3.3V on 32% · 4.7 kΩ (6), 2.2 kΩ (4), 10 kΩ (1)
GND-PADpin 39Connected to: GND 94%

21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LCDZapperPro by charcole, ESP32BB by asukiaaa, Shuttle by uli and VFD Watch by Pakue95.

The ESP32-WROOM in open source designs

The gallery holds 64 open source boards using the ESP32-WROOM from 41 GitHub repositories; a typical one measures about 99 × 89.3 mm and carries around 59 components.

84% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is LCDZapperPro by charcole.

Microcontrollers on boards using the ESP32-WROOM

ESP32-WROOM: common questions

Where can I find a ESP32-WROOM reference design?

Each of the 64 boards on this page is a real design using the ESP32-WROOM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-WROOM 3V3 pin connected?

The 3V3 pin is tied to 3.3V on 36 of 41 designs (not connected on 2, a signal on 2). Counted from the KiCad layouts of 41 open source designs using the ESP32-WROOM.

How is the ESP32-WROOM SD3 pin connected?

The SD3 pin is left unconnected on 36 of 38 designs (a signal on 2). Counted from the KiCad layouts of 41 open source designs using the ESP32-WROOM.

How is the ESP32-WROOM CMD pin connected?

The CMD pin is left unconnected on 36 of 37 designs. Counted from the KiCad layouts of 41 open source designs using the ESP32-WROOM.

What parts are used alongside the ESP32-WROOM?

The AMS1117-3.3, CP2102, AZ1117-3.3, BME280 and CP2102N-A01-GQFN24 appear in the most repositories here.

Which microcontrollers do boards using the ESP32-WROOM use?

Most are built on ESP32 (63) and RP2040/RP2350 (1).

How big is a typical board using the ESP32-WROOM?

The median is 99 × 89.3 mm, and 84% are two-layer designs.

What is the most popular open source board using the ESP32-WROOM?

By GitHub stars, LCDZapperPro by charcole, with 161 stars.

Can I simulate one of these boards using the ESP32-WROOM before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part