Left

eduarbo·flan·sources/piantor/left.kicad_pcb

Left PCB layout, top view — open source RP2040/RP2350 board by eduarbo

About the Left PCB

Left is an open source RP2040/RP2350 PCB design by eduarbo, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 138.8 × 89.9 mm, with 29 components from 7 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. By type, the board carries 21 relays, 2 resistors, 1 IC and 1 connector.

It belongs with the keyboards, iot & wireless and displays & leds designs in this gallery.

From the project

Flan Keyboard is an open-source, low-profile wireless split keyboard in four sizes (36, 42, 46 and 54 keys), with Choc v1 hot-swap switches, ZMK firmware and a 3D configurator. Digital prototype.

Homemade, like a good flan. Flan is an open-source, low-profile wireless split keyboard for DIY builders. All four sizes (36, 42, 46 and 54 keys) use Choc v1 hot-swap switches and ZMK firmware. The digital prototype has interchangeable cases, magnetic display frames, 31 themes and per-key colors. Physical testing is pending.

flankbd.com → · Explore and customize in 3D → · Parts and buying links → · Order PCBs → · Build guide → · Edit in FreeCAD →

Left, from the project README
From the project README

Main components on the Left

Left bill of materials (BOM)

29 components, 7 distinct parts.

QtyPartRefs
1
Pico
U2
1
TRRS
J1
21
KEYSW
K00, K01, K02, K03, K04, K05, K10, K11 +13
2
MountingHole
MB1, MB2
2
MountingHole
MB3, MB4
1
5k6
R1
1
10k
R2

Left design files

The KiCad project lives in the eduarbo/flan repository on GitHub; these links point at the commit this page was built from.

Left: common questions

What microcontroller does the Left use?

The Left is built around the Pico, from the RP2040/RP2350 family.

How big is the Left PCB?

The Left measures 138.8 × 89.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Left?

29 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Left design files?

From the eduarbo/flan repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Left design in my own project?

Yes, under the terms of its GPL-3.0 license, which eduarbo chose for the repository.

Can I test firmware for the Left without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in flan

Similar boards