Knock processor board
eduj3632-code·knock-processor-board
About the Knock processor board
Knock processor board is an open source PCB design by eduj3632-code, published on GitHub. It is a 2-layer board measuring 60 × 40 mm, with 16 components from 16 distinct parts.
Other key parts include the LMV321IDBVR. By type, the board carries 5 capacitors, 5 resistors, 4 connectors and 2 ICs.
It belongs with the audio designs in this gallery.
From the project
Dual-channel knock sensor pre-amplifier board based on rusefi/hellen-miata-NB2 design.
Main components on the Knock processor board
Knock processor board bill of materials (BOM)
16 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMV321IDBVR U470 | SOT-23-5 | U470 |
| 1 | LMV321IDBVR U471 | SOT-23-5 | U471 |
| 1 | IN_KNOCK1 J1 | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | IN_KNOCK2 J2 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | JACK_3.5MM J3 | Jack_3.5mm_Triple_Polypropylene | J3 |
| 1 | J4 | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 100N C470 | C_0603 | C470 |
| 1 | 3.3N C471 | C_0603 | C471 |
| 1 | 330P C472 | C_0603 | C472 |
| 1 | 47P C473 | C_0603 | C473 |
| 1 | 680P C474 | C_0603 | C474 |
| 1 | 470K R470 | R_0603 | R470 |
| 1 | 100K R471 | R_0603 | R471 |
| 1 | 12K R472 | R_0603 | R472 |
| 1 | 100K R473 | R_0603 | R473 |
| 1 | 33K R474 | R_0603 | R474 |
Knock processor board design files
The KiCad project lives in the eduj3632-code/knock-processor-board repository on GitHub; these links point at the commit this page was built from.
Knock processor board: common questions
How big is the Knock processor board?
The Knock processor board measures 60 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Knock processor board?
16 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Knock processor board design files?
From the eduj3632-code/knock-processor-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Knock processor board design in my own project?
The repository has no license, so all rights stay with eduj3632-code. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687