13 open source boards using the LMV321IDBVR

Real designs built with the LMV321IDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the LMV321IDBVR

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the LMV321IDBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The - pin has a series resistor on 6 of 8 designs, most often 47 kΩ (then 100 kΩ).
  • The V- pin is tied to GND on 7 of 8 designs.
  • The + pin has a series resistor on 5 of 8 designs, most often 47 kΩ (then 1 MΩ).
  • The OUT pin has a series resistor on 5 of 7 designs, most often 47 kΩ (then 0 Ω).
+pin 1Connected to: Signal 88%
  • Series resistor on 63% · 47 kΩ (1), 1 MΩ (1), 330 kΩ (1)
  • Resistor to GND on 50% · 47 kΩ (2), 100 kΩ (1), 2 MΩ (1)
V-pin 2Connected to: GND 88%
-pin 3Connected to: The microcontroller 25%
  • Series resistor on 75% · 47 kΩ (3), 100 kΩ (2), 27.5 kΩ (1)
OUTpin 4Connected to: The microcontroller 29%
  • Series resistor on 71% · 47 kΩ (2), 0 Ω (1), 3 MΩ (1)
V+pin 5Connected to: 3.3V 50% · a signal 50%
  • Capacitor to GND on 63% · 100 nF (3), 1 µF (2), 220 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include I.MX6 Demo Board by ts-manuel, Nerf-ATG-Electronics by nico25112005, EEE3088F CKR backup by Carciax and Knock processor board by eduj3632-code.

The LMV321IDBVR in open source designs

The gallery holds 13 open source boards using the LMV321IDBVR from 9 GitHub repositories; a typical one measures about 90 × 72.5 mm and carries around 132 components.

58% are two-layer designs, the rest use four layers or more, and 46% carry an open source license.

The most starred is IMX6 Demo Board from REF by ts-manuel.

Parts used alongside the LMV321IDBVR

Microcontrollers on boards using the LMV321IDBVR

LMV321IDBVR: common questions

Where can I find a LMV321IDBVR reference design?

Each of the 13 boards on this page is a real design using the LMV321IDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the LMV321IDBVR - pin?

The - pin has a series resistor on 6 of 8 designs, most often 47 kΩ (then 100 kΩ). Counted from the KiCad layouts of 8 open source designs using the LMV321IDBVR.

How is the LMV321IDBVR V- pin connected?

The V- pin is tied to GND on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the LMV321IDBVR.

What resistor goes on the LMV321IDBVR + pin?

The + pin has a series resistor on 5 of 8 designs, most often 47 kΩ (then 1 MΩ). Counted from the KiCad layouts of 8 open source designs using the LMV321IDBVR.

Which microcontrollers do boards using the LMV321IDBVR use?

Most are built on RP2040/RP2350 (3), STM32 (3) and ESP32 (2).

How big is a typical board using the LMV321IDBVR?

The median is 90 × 72.5 mm, and 58% are two-layer designs.

What is the most popular open source board using the LMV321IDBVR?

By GitHub stars, IMX6 Demo Board from REF by ts-manuel, with 10 stars.

Can I simulate one of these boards using the LMV321IDBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part