Rhythmsquid

edwindertien·rhythmsquid·electronics/kicad/midi-breakout/trsmidibreakout.kicad_pcb

Rhythmsquid PCB layout, top view — open source board by edwindertien

About the Rhythmsquid PCB

Rhythmsquid is an open source PCB design by edwindertien, published on GitHub. It is a 2-layer board measuring 39.3 × 21.2 mm, with 13 components from 9 distinct parts.

Other key parts include the 74AHC1G125 and 6N138. By type, the board carries 4 resistors, 3 connectors, 3 switches, 2 ICs and 1 diode.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

mechanical drumcomputer design

1. Overview 2. Operation Manual - 2.1 Power-on and startup - 2.2 The APC Mini interface - 2.3 Programming a pattern - 2.4 Tempo control - 2.5 Channel velocity (tapper force) - 2.6 MIDI synchronisation - 2.7 Educational limits - 2.8 Inactivity rest timer - 2.9 Daisy-chaining multiple units 3. Design Documentation - 3.1 System architecture - 3.2 Software — ATmega ADK (main controller) - 3.3 Software — Driver board firmware - 3.4 Electronics — Driver board - 3.5 Electronics — MIDI breakout board - 3.6 Electronics — Arduino Mega ADK - 3.7 Electronics — DFRobot RS485 shield - 3.8 Mechanical — Case…

Rhythmsquid, from the project README
From the project README

Main components on the Rhythmsquid

Rhythmsquid bill of materials (BOM)

13 components, 9 distinct parts.

QtyPartRefs
1
74AHC1G125
U1
1
6N138
U2
1
Conn_01x04
J1
1
MIDI out
J4
1
MIDI in
J5
1
thru
SW1
2
TRSA-B
SW2, SW3
1
MBRA340
D1
4
220R
R1, R2, R3, R4

Rhythmsquid design files

The KiCad project lives in the edwindertien/rhythmsquid repository on GitHub; these links point at the commit this page was built from.

Rhythmsquid: common questions

How big is the Rhythmsquid PCB?

The Rhythmsquid measures 39.3 × 21.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rhythmsquid?

13 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rhythmsquid design files?

From the edwindertien/rhythmsquid repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rhythmsquid design in my own project?

The repository has no license, so all rights stay with edwindertien. Use it as a reference, and ask the author before reusing the design.

Similar boards