Led budget board

eelstretching·led-budget-board

Led budget board layout, top view — open source RP2040/RP2350 board by eelstretching

About the Led budget board

Led budget board is an open source RP2040/RP2350 PCB design by eelstretching, published on GitHub. It is a 2-layer board measuring 61.5 × 73 mm, with 48 components from 25 distinct parts.

Its main chip is the SC1633, from the RP2040/RP2350 family. Other key parts include the TPS54202HDDCR. By type, the board carries 22 resistors, 12 capacitors, 7 connectors, 3 diodes, 1 IC and 1 module.

It belongs with the rf & radio and power & battery designs in this gallery.

From the project

A budget version of the processor board that uses a socketed Pico 2 w.

A "budget" LED processor board: a carrier for a Raspberry Pi Pico 2 W that drives 16 strands through two of the standard 16-pin output shrouds. Little sibling of led-processor-board.

- Shroud pinout: data 1-8 on even pins 2-16, GND on odd pins 1-11, pin 13 = 3.3 V, pin 15 = 5 V. Pin 1 is the triangle on the shroud. 33R in series with each data line, 100 nF on each rail. - Power: 12 V barrier terminal (the output boards' DBT50G-9.5-2P, takes 14 AWG), SS34 against a reversed lead, TPS54202H 5 V buck (same parts and values), then a B5819W into the Pico's VSYS so USB and 12 V can be plugged in…

Led budget board, from the project README
From the project README

Main components on the Led budget board

Led budget board bill of materials (BOM)

48 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS54202HDDCR
TPS54202H
U1
1
SC1633
Pico 2 W
A1
1
DBT50G-9.5-2P
12V IN
J1
1
OUT1
J2
1
OUT1
OUT2
J3
1
C49257
UART
J4
1
B-2100S04P-A110
I2C
J5
1
B-2100S08P-A110
SPARE
J6
1
C160404
STEMMA QT
J7
1
TS-1088R-02526
RUN
SW1
1
SS34
D1
1
B5819W
D2
1
KT-0603YG
Green
D3
1
SWPA8040S150MT
15u
L1
2
CL21A106KBYNNNE
10u
C1, C2
2
CC0603KRX7R9BB104
100n
C3, C4
1
0402CG750J500NT
75p
C5
3
CL21A226MAQNNNE
22u
C6, C7, C8
4
CL05B104KO5NNNC
100n
C9, C10, C11, C12
1
0402WGF5103TCE
510k
R1
Show 5 more
QtyPartRefs
1
0402WGF1003TCE
100k
R2
1
0402WGF1332TCE
13.3k
R3
1
0402WGF1001TCE
1k
R4
16
0402WGF330JTCE
33
R5, R6, R7, R8, R9, R10, R11, R12 +8
2
0402WGF1002TCE
10k
R21, R22

Led budget board design files

The KiCad project lives in the eelstretching/led-budget-board repository on GitHub; these links point at the commit this page was built from.

Led budget board: common questions

What microcontroller does the Led budget board use?

The Led budget board is built around the SC1633, from the RP2040/RP2350 family.

How big is the Led budget board?

The Led budget board measures 61.5 × 73 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Led budget board?

48 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Led budget board design files?

From the eelstretching/led-budget-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Led budget board design in my own project?

The repository has no license, so all rights stay with eelstretching. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Led budget board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards