9 open source boards using the SC1633
Real designs built with the SC1633, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Telephone Buddy
weaslepalace
14 × 9 mm130 parts2LNo license0RP2040/RP2350
Vr65816
vruumllc
150 × 125 mm71 parts2LNo license0RP2040/RP2350
Led budget board
eelstretching
61.5 × 73 mm48 parts2LNo license0Raspberry Pi
Unipad
ricardoquesada
62.5 × 60 mm44 parts4LCC-BY-NC-4.00RP2040/RP2350
TWSUDiySynthKit
GreeniusGenius
198.4 × 65 mm40 parts2LNo license0RP2040/RP2350
Console a
jmcpheron
92 × 52 mm31 parts2LMIT0Raspberry Pi
Aki300yenLCD-raspico2w
Droplet-Collective
100 × 52 mm24 parts2LNo license0Raspberry Pi
Aki300yenLCD-raspico2w
fnc765
100 × 52 mm24 parts2LNo license0RP2040/RP2350
Console pocket
jmcpheron
51 × 85 mm16 parts2LMIT0
How designs wire the SC1633
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the SC1633 connects to, and the resistors, capacitors and other passives placed on it.
- The 3V3_OUT pin is tied to 3.3V on 8 of 8 designs.
- The ADC_VREF pin is left unconnected on 7 of 8 designs.
- The 3V3_EN pin is left unconnected on 7 of 8 designs.
- The VSYS pin is left unconnected on 5 of 8 designs (VSYS on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3, 8, 13, 18, 23, 28, 33, 38, D2 | Connected to: GND 94% | — |
| ADC_VREFpin 35 | Connected to: Not connected 88% | — |
| 3V3_OUTpin 36 | Connected to: 3.3V 100% | — |
| 3V3_ENpin 37 | Connected to: Not connected 88% | — |
| VSYSpin 39 | Connected to: Not connected 63% · VSYS 38% | — |
| SWCLKpin 42, D1 | Connected to: Not connected 60% · GND 20% · a signal 20% | — |
| SWDIOpin 43, D3 | Connected to: Not connected 60% · a signal 40% | — |
28 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Aki300yenLCD-raspico2w by Droplet-Collective, Led budget board by eelstretching, Aki300yenLCD-raspico2w by fnc765 and TWSUDiySynthKit by GreeniusGenius.
The SC1633 in open source designs
The gallery holds 9 open source boards using the SC1633 from 8 GitHub repositories; a typical one measures about 92 × 60 mm and carries around 40 components.
89% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.
The most starred is Telephone Buddy by weaslepalace.
Parts used alongside the SC1633
Microcontrollers on boards using the SC1633
What boards using the SC1633 are built for
SC1633: common questions
Where can I find a SC1633 reference design?
Each of the 9 boards on this page is a real design using the SC1633. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SC1633 3V3_OUT pin connected?
The 3V3_OUT pin is tied to 3.3V on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the SC1633.
How is the SC1633 ADC_VREF pin connected?
The ADC_VREF pin is left unconnected on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the SC1633.
How is the SC1633 3V3_EN pin connected?
The 3V3_EN pin is left unconnected on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the SC1633.
Which microcontrollers do boards using the SC1633 use?
Most are built on RP2040/RP2350 (6) and Raspberry Pi (3).
How big is a typical board using the SC1633?
The median is 92 × 60 mm, and 89% are two-layer designs.
What is the most popular open source board using the SC1633?
By GitHub stars, Telephone Buddy by weaslepalace, with 0 stars.
Can I simulate one of these boards using the SC1633 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.