5 open source boards using the TPS54202HDDCR
Real designs built with the TPS54202HDDCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Led processor board
eelstretching
100 × 89.5 mm123 parts2LNo license0ESP32
Esp-Sumo
Dunbarin-O
175.2 × 64.7 mm84 parts4LNo license0Machine JDG 2027 - Shield Mega 2560 PRO v2
losientowilson67
100 × 89 mm78 parts2LNo license0RP2040/RP2350
Led budget board
eelstretching
61.5 × 73 mm48 parts2LNo license0Power rx
redhotchili0909
140 × 140 mm49 parts2LNo license1
How designs wire the TPS54202HDDCR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS54202HDDCR connects to, and the resistors, capacitors and other passives placed on it.
- The SW_2 pin has a series capacitor on 5 of 5 designs, most often 100 nF.
- The SW_2 pin has a inductor on 5 of 5 designs, most often 15 µH (then 10 µH).
- The VIN_3 pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 100 nF).
- The FB_4 pin has a capacitor to the supply on 5 of 5 designs, most often 75 pF (then 56 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_1pin 1 | Connected to: GND 100% | — |
| SW_2pin 2 | Connected to: Signal 100% |
|
| VIN_3pin 3 | Connected to: 12V 60% · a signal 40% |
|
| FB_4pin 4 | Connected to: Signal 100% |
|
| EN_5pin 5 | Connected to: Signal 100% |
|
| BOOT_6pin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Power rx by redhotchili0909, Esp-Sumo by Dunbarin-O, Led budget board by eelstretching and Led processor board by eelstretching.
The TPS54202HDDCR in open source designs
The gallery holds 5 open source boards using the TPS54202HDDCR from 5 GitHub repositories; a typical one measures about 100 × 89 mm and carries around 78 components.
80% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Power rx by redhotchili0909.
Microcontrollers on boards using the TPS54202HDDCR
What boards using the TPS54202HDDCR are built for
TPS54202HDDCR: common questions
Where can I find a TPS54202HDDCR reference design?
Each of the 5 boards on this page is a real design using the TPS54202HDDCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS54202HDDCR SW_2 pin connected?
The SW_2 pin has a series capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TPS54202HDDCR.
What decoupling capacitors do designs use on the TPS54202HDDCR VIN_3 pin?
The VIN_3 pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the TPS54202HDDCR.
How is the TPS54202HDDCR FB_4 pin connected?
The FB_4 pin has a capacitor to the supply on 5 of 5 designs, most often 75 pF (then 56 pF). Counted from the KiCad layouts of 5 open source designs using the TPS54202HDDCR.
Which microcontrollers do boards using the TPS54202HDDCR use?
Most are built on RP2040/RP2350 (2) and ESP32 (1).
How big is a typical board using the TPS54202HDDCR?
The median is 100 × 89 mm, and 80% are two-layer designs.
What is the most popular open source board using the TPS54202HDDCR?
By GitHub stars, Power rx by redhotchili0909, with 1 stars.
Can I simulate one of these boards using the TPS54202HDDCR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.