Zigbee gateway
About the Zigbee gateway PCB
Zigbee gateway is an open source ESP8266 PCB design by ehsanmqn, published on GitHub. It is a 2-layer board measuring 80 × 52 mm, with 18 components from 12 distinct parts.
Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the CC2530-A1_Module and AZ1117-3.3. By type, the board carries 4 resistors, 3 ICs, 3 connectors, 3 switches, 3 capacitors and 1 diode.
It belongs with the iot & wireless designs in this gallery.
From the project
Zigbee gateway with ESP32
Main components on the Zigbee gateway
Zigbee gateway bill of materials (BOM)
18 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP-12E | ESP-12E | U1 |
| 1 | CC2530-A1_Module | cc2530-a2 | U2 |
| 1 | AZ1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 2 | Conn_01x04 | PinHeader_1x05_P2.54mm_Horizontal | J1, J2 |
| 1 | Conn_01x02_Male | Pin_D1.4mm_L8.5mm_W2.8mm_FlatFork | J3 |
| 1 | HLK-PM01 | Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 3 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3 |
| 1 | RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 2 | 22uF | CP_EIA-1608-10_AVX-L_Pad1.25x1.05mm_HandSolder | C2, C3 |
| 3 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R4 |
| 1 | 2.2K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
Zigbee gateway design files
The KiCad project lives in the ehsanmqn/zigbee-gateway repository on GitHub; these links point at the commit this page was built from.
- Layoutzigbee-gateway.kicad_pcb
- Schematiczigbee-gateway.kicad_sch
Zigbee gateway: common questions
What microcontroller does the Zigbee gateway use?
The Zigbee gateway is built around the ESP-12E, from the ESP8266 family.
How big is the Zigbee gateway PCB?
The Zigbee gateway measures 80 × 52 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Zigbee gateway?
18 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Zigbee gateway design files?
From the ehsanmqn/zigbee-gateway repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Zigbee gateway design in my own project?
The repository has no license, so all rights stay with ehsanmqn. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Zigbee gateway without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398