126 open source boards using the ESP-12E
Real designs built with the ESP-12E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Espway
espway
43 × 34.3 mm33 parts2LLGPL-3.0122ESP8266
PC-KHARON-386-MAIN
UzixLS
100 × 100 mm157 parts4LCC-BY-SA-4.0111ESP8266
TranspOtterNG
Jana-Marie
100 × 45 mm59 parts2LNo license51ESP8266
DCHDMI
citrus3000psi
74 × 58.8 mm92 parts4LMIT49ESP8266
Basicengine
uli
85 × 56 mm44 parts2LNo license48ESP8266
MIST.1010
UzixLS
100 × 100 mm259 parts2LMIT43ESP8266
ESPlant
CCHS-Melbourne
97 × 77.5 mm75 parts2LTAPR-OHL-1.037ESP8266
Ornament
idlehandsdev
76.2 × 93.4 mm27 parts2LNo license33ESP8266
Split flap fae
codingcatgirl
40 × 80 mm39 parts2LApache-2.030ESP8266
Iot wifi uno hw
iotmakervn
68.5 × 53.3 mm48 parts2LNo license26ESP8266
OpenBCI Wifi Shield
OpenBCI
61.2 × 61.2 mm67 parts2LCustom license22ESP8266
Rick-Flash
rectifiedtech
80 × 24 mm19 parts2LMIT21ESP8266
TapeDispenser
stephenjdc
50 × 30 mm13 parts2LNo license21ESP8266
Esp8266-led dimmer
stelioskat
36 × 31 mm10 parts2LMIT20ESP8266
Forcegauge
szbeni
60 × 40 mm69 parts2LGPL-3.018ESP8266
Divtiesus maple
anarsoul
76.5 × 56.9 mm41 parts2LGPL-3.016- schematic only · 6 partsESP8266
Epaper
junglejim8
6 partsNo license16 ESP8266
ESP-Hiro
Chrismettal
100 × 50 mm79 parts2LGPL-3.015ESP8266
TyroBot
TyroElectronics
68 × 49.3 mm44 parts2LGPL-3.013ESP8266
Phloppy 0
piotr-wiszowaty
110 × 55 mm83 parts4LGPL-3.012ESP8266
Seatalk wifi
atonizzo
31 × 22 mm32 parts2LApache-2.012ESP8266
Zx sizif-512-wifi
UzixLS
21.9 × 29.5 mm11 parts2LNo license12ESP8266
Wb2s to esp12
lsr1
24.1 × 20.1 mm8 parts2LNo license11ESP8266
UnlockOslo
jonnor
65 × 56 mm89 parts2LMIT10ESP8266
3210retro
DasBasti
44 × 118 mm197 parts4LApache-2.09ESP8266
Flight controller v2
Eryk-Mozdzen
45 × 89 mm108 parts4LNo license9ESP8266
Esp dsc
synfinatic
53.2 × 35.3 mm19 parts2LGPL-3.09ESP8266
Esp8266
panStamp
158.6 × 51.8 mm62 partsGPL-3.08ESP8266
Aria
adamjvr
80 × 27 mm70 parts4LNo license7ESP8266
Gamegame4000
allhandsactive
108.8 × 57.8 mm34 parts2LNo license7ESP8266
Esp8266 apa102 bulb
robertfoss
92.4 × 91.4 mm113 parts2LGPL-2.05ESP8266
PoolMonitor
tpanajott
54.4 × 31 mm28 parts4LNo license5ESP8266
ReflowOven
hjf
58.4 × 101.6 mm45 parts2LMIT4ESP8266
Shihen
likeablob
89 × 36 mm50 parts2LMIT3ESP8266
Divtiesus acer
arleybls
76.6 × 57.4 mm40 parts2LNo license3ESP8266
Minitoy
al177
44 × 40 mm38 parts2LNo license3
How designs wire the ESP-12E
Read from the KiCad layouts of 100 open source designs, one per repository: what each pin of the ESP-12E connects to, and the resistors, capacitors and other passives placed on it.
- The RST pin has a pull-up to 3.3V on 69 of 100 designs, most often 10 kΩ (then 4.7 kΩ).
- The EN pin has a pull-up to 3.3V on 68 of 100 designs, most often 10 kΩ (then 1 kΩ).
- The GPIO9 pin is left unconnected on 74 of 99 designs (a signal on 24).
- The MOSI pin is left unconnected on 72 of 99 designs (a signal on 27).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RSTpin 1 | Connected to: A connector 21% |
|
| ENpin 3 | Connected to: Signal 82% |
|
| VCCpin 8 | Connected to: 3.3V 86% |
|
| CS0pin 9 | Connected to: Not connected 70% · GND 23% | — |
| MISOpin 10 | Connected to: Not connected 69% · a signal 28% | — |
| GPIO9pin 11 | Connected to: Not connected 75% · a signal 24% | — |
| GPIO10pin 12 | Connected to: Not connected 69% · a signal 31% | — |
| MOSIpin 13 | Connected to: Not connected 73% · a signal 27% | — |
| SCLKpin 14 | Connected to: Not connected 72% · a signal 28% | — |
| GNDpin 15 | Connected to: GND 74% · a signal 25% | — |
| GPIO15pin 16 | Connected to: A connector 26% |
|
| GPIO2pin 17 | Connected to: Signal 59% · not connected 40% |
|
| GPIO0pin 18 | Connected to: A connector 26% · not connected 28% |
|
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Espway by espway, PC-KHARON-386-MAIN by UzixLS, TranspOtterNG by Jana-Marie and DCHDMI by citrus3000psi.
The ESP-12E in open source designs
The gallery holds 126 open source boards using the ESP-12E from 104 GitHub repositories; a typical one measures about 70.1 × 52.9 mm and carries around 43 components.
87% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is Espway by espway.
Parts used alongside the ESP-12E
Microcontrollers on boards using the ESP-12E
What boards using the ESP-12E are built for
ESP-12E: common questions
Where can I find a ESP-12E reference design?
Each of the 126 boards on this page is a real design using the ESP-12E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ESP-12E RST pin?
The RST pin has a pull-up to 3.3V on 69 of 100 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 100 open source designs using the ESP-12E.
What pull-up resistor is used on the ESP-12E EN pin?
The EN pin has a pull-up to 3.3V on 68 of 100 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 100 open source designs using the ESP-12E.
How is the ESP-12E GPIO9 pin connected?
The GPIO9 pin is left unconnected on 74 of 99 designs (a signal on 24). Counted from the KiCad layouts of 100 open source designs using the ESP-12E.
What parts are used alongside the ESP-12E?
The AMS1117-3.3, LM1117-3.3, CH340G, MT3608 and CH340C appear in the most repositories here.
Which microcontrollers do boards using the ESP-12E use?
Most are built on ESP8266 (121), RP2040/RP2350 (3) and ESP32 (2).
How big is a typical board using the ESP-12E?
The median is 70.1 × 52.9 mm, and 87% are two-layer designs.
What is the most popular open source board using the ESP-12E?
By GitHub stars, Espway by espway, with 122 stars.
Can I simulate one of these boards using the ESP-12E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.