Navrh03
Ejdmmm·MP·navrhAktualni/navrh03.kicad_pcb
About the Navrh03 PCB
Navrh03 is an open source ESP32 PCB design by Ejdmmm, published on GitHub. It is a 2-layer board measuring 134.6 × 90.4 mm, with 82 components from 12 distinct parts.
Its main chip is the ESP32-DEVKITC-32UE, from the ESP32 family. Other key parts include the PCA9685. By type, the board carries 40 resistors, 35 connectors, 3 ICs, 3 capacitors and 1 transistor.
From the project
Maturitní práce
Main components on the Navrh03
Navrh03 bill of materials (BOM)
82 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | PCA9685 | TSSOP28 | U1-Left1, U2 |
| 1 | ESP32-DEVKITC-32UE | ESPRESSIF_ESP32-DEVKITC-32UE | U3 |
| 1 | AOD417 | DPAK228P994X240_3N | Q1 |
| 1 | Screw_Terminal_01x02 | PinHeader_1x02_P2.00mm_Vertical | J2 |
| 1 | Conn_01x19_Pin | PinHeader_1x19_P2.00mm_Vertical | J3 |
| 32 | Conn_01x03_Pin | PinHeader_1x03_P2.00mm_Vertical | J4, J5, J6, J7, J8, J9, J10, J10R1 +24 |
| 1 | Conn_01x11_Pin | PinHeader_1x11_P2.00mm_Vertical | J28 |
| 1 | C | C_Disc_D7.5mm_W5.0mm_P7.50mm | C1 |
| 2 | C | CP_EIA-1608-08_AVX-J | C2, C3 |
| 38 | R | R_0201_0603Metric | R1, R2, R3, R4, R5, R6, R8, R10 +30 |
| 1 | RJP2 | R_0201_0603Metric | R7 |
| 1 | RJP1 | R_0201_0603Metric | R8J1 |
Navrh03 design files
The KiCad project lives in the Ejdmmm/MP repository on GitHub; these links point at the commit this page was built from.
Navrh03: common questions
What microcontroller does the Navrh03 use?
The Navrh03 is built around the ESP32-DEVKITC-32UE, from the ESP32 family.
How big is the Navrh03 PCB?
The Navrh03 measures 134.6 × 90.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Navrh03?
82 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Navrh03 design files?
From the Ejdmmm/MP repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Navrh03 design in my own project?
The repository has no license, so all rights stay with Ejdmmm. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Navrh03 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in MP
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k