Standalone keyboard
ElDragonMC·Standalone-keyboard·PCB KiCad Files/standalone-keypad.kicad_pcb
About the Standalone keyboard PCB
Standalone keyboard is an open source ESP32 PCB design by ElDragonMC, published on GitHub. It is a 2-layer board measuring 220 × 103 mm, with 5 components from 5 distinct parts.
Its main chip is the ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 3 switches and 1 IC.
It belongs with the audio and keyboards designs in this gallery.
From the project
This is my project for third week Half Life, a keyboard powered with a ESP32 connected to a power bank that uses a speaker to play 3 diferent sounds (acoustic, electric and organ). That's what makes it standalone!
I enjoyed very much making this project (specialy the PCB). For me, the most difficult part, was making the code so it can properly function.
I designed the PCB with KiCad (the only PCB design software i know how to use) following some parts from the starter guide to have a base idea. I wanted to make a case for it but i think it will look cooler to have it raw. A sleek black PCB will look very cool.
Main components on the Standalone keyboard
Standalone keyboard bill of materials (BOM)
5 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-ZERO | MODULE_ESP32-S3-ZERO | U1 |
| 1 | Capacitive keys | Keyboard | ESP32 |
| 1 | Acoustic sound | SW_Cherry_MX_1.00u_PCB | SW1 |
| 1 | Electric sound | SW_Cherry_MX_1.00u_PCB | SW2 |
| 1 | Organ sound | SW_Cherry_MX_1.00u_PCB | SW3 |
Standalone keyboard design files
The KiCad project lives in the ElDragonMC/Standalone-keyboard repository on GitHub; these links point at the commit this page was built from.
Standalone keyboard: common questions
What microcontroller does the Standalone keyboard use?
The Standalone keyboard is built around the ESP32-S3-ZERO, from the ESP32 family.
How big is the Standalone keyboard PCB?
The Standalone keyboard measures 220 × 103 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Standalone keyboard?
5 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Standalone keyboard design files?
From the ElDragonMC/Standalone-keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Standalone keyboard design in my own project?
The repository has no license, so all rights stay with ElDragonMC. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Standalone keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k