Analog overdrive guitar pedal
elia-pia·Analog-overdrive-guitar-pedal·Pedal_pcb/Pedal_pcb.kicad_pcb
About the Analog overdrive guitar pedal PCB
Analog overdrive guitar pedal is an open source PCB design by elia-pia, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 47 × 49.5 mm, with 22 components from 16 distinct parts.
Other key parts include the TL082. By type, the board carries 7 capacitors, 5 resistors, 2 diodes, 1 IC and 1 switch.
It belongs with the audio designs in this gallery.
From the project
compact and easy to use guitar pedal
A compact and easy-to-use analog overdrive guitar pedal.
Circuit schematic | PCB layout --- | --- | PCB design files
this is the a simple overdrive pedal that i designed personally you should be able to build it for around 50$ or less
Qty | Part | Notes --- | --- | --- 1 | TL082 operational amplifier (U1A) | Main amplifier stage 2 | 1N4148 diodes (D1, D2) | Signal clipping 1 | Gain potentiometer | 500 kΩ 1 | Tone potentiometer | 10 kΩ 1 | Volume potentiometer | 100 kΩ 1 | SPDT switch (SW1) | Power switch 1 | 9V battery or suitable 9V supply (BT1) | Power source 2 | 1/4-inch audio jacks…
Main components on the Analog overdrive guitar pedal
Analog overdrive guitar pedal bill of materials (BOM)
22 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL082 | DIP-8_W7.62mm | U1 |
| 3 | Conn_01x02 | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | Battery1, Input1, Output1 |
| 1 | SW_Nidec_CAS-120A1 | PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | 500 kΩ | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | gain1 |
| 1 | 10 kΩ | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | tone1 |
| 1 | 100 kΩ | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | volume1 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | 100 pF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 220 nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 1 µF | CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | 22 nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C4 |
| 1 | 470 nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C5 |
| 2 | 47 µF | CP_Radial_D5.0mm_P2.00mm | C6, C7 |
| 1 | 1 kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 3 | 10 kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4, R5 |
| 1 | 1 MΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
Analog overdrive guitar pedal design files
The KiCad project lives in the elia-pia/Analog-overdrive-guitar-pedal repository on GitHub; these links point at the commit this page was built from.
- LayoutPedal_pcb/Pedal_pcb.kicad_pcb
- SchematicPedal_pcb/Pedal_pcb.kicad_sch
Analog overdrive guitar pedal: common questions
How big is the Analog overdrive guitar pedal PCB?
The Analog overdrive guitar pedal measures 47 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Analog overdrive guitar pedal?
22 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Analog overdrive guitar pedal design files?
From the elia-pia/Analog-overdrive-guitar-pedal repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Analog overdrive guitar pedal design in my own project?
Yes, under the terms of its GPL-3.0 license, which elia-pia chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687