Deskdeck

Elias-m-S·deskdeck·hardware/deskdeck.kicad_pcb

Deskdeck PCB layout, top view — open source ESP32 board by Elias-m-S

About the Deskdeck PCB

Deskdeck is an open source ESP32 PCB design by Elias-m-S, published on GitHub under the MIT license. It is a 2-layer board measuring 119 × 62 mm, with 18 components from 15 distinct parts.

Its main chip is the ESP32-S3 SuperMini, from the ESP32 family. Other key parts include the PC817 UP and PC817 DOWN. By type, the board carries 8 switches, 4 resistors, 3 ICs and 3 connectors.

It belongs with the iot & wireless, keyboards and sensors designs in this gallery.

From the project

ESP32-S3 macro pad under the desk edge: per-app volume knobs, sit/stand desk controller with laser height sensor, Home Assistant link. Firmware + KiCad PCB + FreeCAD enclosure.

2-layer board, 119 x 62 mm, through-hole parts only (everything is hand-solderable). KiCad 7 format, opens in KiCad 7 to 10 (newer versions ask to convert once).

The desk switches high side: the original hand switch connects VCC to M1 (up) or M2 (down). The desk buttons ▲▼ and the optocoupler outputs sit in parallel on these lines, so the buttons always work, even without the ESP.

Deskdeck, from the project README
From the project README

Main components on the Deskdeck

ESP32-S3 SuperMiniPC817 UPPC817 DOWN

Deskdeck bill of materials (BOM)

18 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3 SuperMini
U1
1
PC817 UP
U2
1
PC817 DOWN
U3
1
OLED 1.3" SH1106
J1
1
VL53L1X sensor
J2
1
Desk
J3
2
EC11
SW1, SW2
1
MX key 1
SW3
1
MX key 2
SW4
1
MX key 3
SW5
1
MX key 4
SW6
1
MX desk UP
SW7
1
MX desk DOWN
SW8
2
470
R1, R2
2
10K
10k
R3, R4

Deskdeck design files

The KiCad project lives in the Elias-m-S/deskdeck repository on GitHub; these links point at the commit this page was built from.

Deskdeck: common questions

What microcontroller does the Deskdeck use?

The Deskdeck is built around the ESP32-S3 SuperMini, from the ESP32 family.

How big is the Deskdeck PCB?

The Deskdeck measures 119 × 62 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Deskdeck?

18 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Deskdeck design files?

From the Elias-m-S/deskdeck repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Deskdeck design in my own project?

Yes, under the terms of its MIT license, which Elias-m-S chose for the repository.

Can I test firmware for the Deskdeck without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards