9 open source boards using the ESP32-S3_SuperMini

Real designs built with the ESP32-S3_SuperMini, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the ESP32-S3_SuperMini

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the ESP32-S3_SuperMini connects to, and the resistors, capacitors and other passives placed on it.

  • The 5V_1 pin is left unconnected on 5 of 8 designs (a signal on 3).
  • The RX_RX pin is left unconnected on 3 of 3 designs.
  • The TX_TX pin is left unconnected on 3 of 3 designs.
  • The 5V_5V pin is left unconnected on 2 of 3 designs.
5V_1pin 1Connected to: Not connected 63% · a signal 38%
5V_5Vpin 5VConnected to: Not connected 67% · 5V 33%
RX_RXpin RXConnected to: Not connected 100%
TX_TXpin TXConnected to: Not connected 100%

17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Spotube by Sudo-Aju, Mentaldsp by thvofi, Cam by Anayjain1129 and MusicDisplay by anvaymathur.

The ESP32-S3_SuperMini in open source designs

The gallery holds 9 open source boards using the ESP32-S3_SuperMini from 8 GitHub repositories; a typical one measures about 90 × 62 mm and carries around 18 components.

100% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.

The most starred is Spotube by Sudo-Aju.

Microcontrollers on boards using the ESP32-S3_SuperMini

What boards using the ESP32-S3_SuperMini are built for

ESP32-S3_SuperMini: common questions

Where can I find a ESP32-S3_SuperMini reference design?

Each of the 9 boards on this page is a real design using the ESP32-S3_SuperMini. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-S3_SuperMini 5V_1 pin connected?

The 5V_1 pin is left unconnected on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the ESP32-S3_SuperMini.

How is the ESP32-S3_SuperMini RX_RX pin connected?

The RX_RX pin is left unconnected on 3 of 3 designs. Counted from the KiCad layouts of 8 open source designs using the ESP32-S3_SuperMini.

How is the ESP32-S3_SuperMini TX_TX pin connected?

The TX_TX pin is left unconnected on 3 of 3 designs. Counted from the KiCad layouts of 8 open source designs using the ESP32-S3_SuperMini.

Which microcontrollers do boards using the ESP32-S3_SuperMini use?

Most are built on ESP32 (9).

How big is a typical board using the ESP32-S3_SuperMini?

The median is 90 × 62 mm, and 100% are two-layer designs.

What is the most popular open source board using the ESP32-S3_SuperMini?

By GitHub stars, Spotube by Sudo-Aju, with 2 stars.

Can I simulate one of these boards using the ESP32-S3_SuperMini before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part