Midi-Keyboard

ema-rauf·Midi-Keyboard·PCB/MIDI-keypad.kicad_pcb

Midi-Keyboard PCB layout, top view — open source ESP32 board by ema-rauf

About the Midi-Keyboard PCB

Midi-Keyboard is an open source ESP32 PCB design by ema-rauf, published on GitHub. It is a 2-layer board measuring 86.6 × 90.6 mm, with 9 components from 5 distinct parts.

Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 4 switches, 3 diodes, 1 IC and 1 connector.

It belongs with the keyboards and audio designs in this gallery.

From the project

A USB MIDI controller on a custom PCB. Touch the copper keys to play notes, press the switches for drums, and turn the knob for volume.

A USB MIDI controller on a custom PCB. Touch the copper keys to play notes, press the switches for drums, and turn the knob for volume.

It plugs into a computer over USB-C and shows up as a MIDI instrument, so it works with music software like FL Studio, Ableton or LMMS.

The 7 piano keys are bare copper pads on the PCB. The ESP32-S3 measures their capacitance, so when your finger touches a pad it detects the change and sends a MIDI note. The 3 Choc switches send drum notes, the rotary encoder changes the computer's volume, and 3 RGB LEDs mounted on the back shine through holes in the board.

Midi-Keyboard, from the project README
From the project README

Main components on the Midi-Keyboard

Midi-Keyboard bill of materials (BOM)

9 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Waveshare ESP32-S3-ZERO
U1
1
CONN_01X07_PIN
Conn_01x07_Pin
J1
3
SW_Push
SW1, SW2, SW3
1
RotaryEncoder_Switch_MP
SW4
3
SK6812MINI-E
D1, D2, D3

Midi-Keyboard design files

The KiCad project lives in the ema-rauf/Midi-Keyboard repository on GitHub; these links point at the commit this page was built from.

Midi-Keyboard: common questions

What microcontroller does the Midi-Keyboard use?

The Midi-Keyboard is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.

How big is the Midi-Keyboard PCB?

The Midi-Keyboard measures 86.6 × 90.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Midi-Keyboard?

9 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Midi-Keyboard design files?

From the ema-rauf/Midi-Keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Midi-Keyboard design in my own project?

The repository has no license, so all rights stay with ema-rauf. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Midi-Keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards