Study-Air-Station

ema-rauf·Study-Air-Station·hardware/air_station.kicad_pcb

Study-Air-Station PCB layout, top view — open source ESP32 board by ema-rauf

About the Study-Air-Station PCB

Study-Air-Station is an open source ESP32 PCB design by ema-rauf, published on GitHub. It is a 2-layer board measuring 100 × 80 mm, with 24 components from 18 distinct parts.

Its main chip is the ESP32_DevKit_V1, from the ESP32 family. By type, the board carries 7 resistors, 6 connectors, 3 capacitors, 2 switches, 2 diodes and 1 IC.

It belongs with the sensors and iot & wireless designs in this gallery.

From the project

A desk air quality monitor. It measures CO2, fine dust, temperature and humidity, shows a live score on a color display, runs a fan when the air gets bad, and sends a Telegram message when it is time to open a window. Everything is logged to a microSD card.

A desk air quality monitor. It measures CO2, fine dust, temperature and humidity, shows a live score on a color display, runs a fan when the air gets bad, and sends a Telegram message when it is time to open a window. Everything is logged to a microSD card.

When I study in a closed room, CO2 climbs past 1500 ppm within an hour and I get tired without knowing why. I wanted a device that shows the number, reacts on its own and keeps a record, so I can see how a room behaves over a day.

Study-Air-Station, from the project README
From the project README

Main components on the Study-Air-Station

Study-Air-Station bill of materials (BOM)

24 components, 18 distinct parts.

QtyPartRefs
1
ESP32_DevKit_V1
U1
1
IRLZ44N
Q1
1
5V_IN
J1
1
SCD40
J2
1
PMS5003
J3
1
TFT_ST7789
J4
1
MICROSD
J5
1
FAN_5V
J6
1
Buzzer
BZ1
1
Silence
SW1
1
Page
SW2
1
RGB_LED
LED1
2
1N5819
D1, D2
1
470uF 10V
C1
2
100nF
C2, C3
1
100
R1
3
10k
R2, R6, R7
3
220
R3, R4, R5

Study-Air-Station design files

The KiCad project lives in the ema-rauf/Study-Air-Station repository on GitHub; these links point at the commit this page was built from.

Study-Air-Station: common questions

What microcontroller does the Study-Air-Station use?

The Study-Air-Station is built around the ESP32_DevKit_V1, from the ESP32 family.

How big is the Study-Air-Station PCB?

The Study-Air-Station measures 100 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Study-Air-Station?

24 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Study-Air-Station design files?

From the ema-rauf/Study-Air-Station repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Study-Air-Station design in my own project?

The repository has no license, so all rights stay with ema-rauf. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Study-Air-Station without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards