Automatic bike light
emdcomputer-crypto·Automatic-bike-light·Hardware/stardance.kicad_pcb
About the Automatic bike light PCB
Automatic bike light is an open source ESP32 PCB design by emdcomputer-crypto, published on GitHub. It is a 2-layer board measuring 120 × 35 mm, with 23 components from 5 distinct parts.
Its main chip is the XIAO_ESP32_S3, from the ESP32 family. By type, the board carries 10 diodes, 10 resistors, 2 connectors and 1 IC.
It belongs with the power & battery, sensors and iot & wireless designs in this gallery.
From the project
A bike light with automatic brake lights and turn signals powered by an esp32-s3 and an mpu6050
This is my custom built smart bike lighting system powered by a Seeed Studio XIAO ESP32-S3 and an MPU6050 inertial sensor. I designed this project from scratch to provide safety features on the road including automatic deceleration triggered brake lights, dynamic turn signals, crash detection, and a local Wi-Fi web server that lets me control and monitor everything directly from my phone without needing an internet connection or an external app.
Main components on the Automatic bike light
Automatic bike light bill of materials (BOM)
23 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO_ESP32_S3 | MODULE_XIAO_ESP32_S3 | U1 |
| 1 | 5v | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | mpu6050 | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 10 | LED | LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 10 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +2 |
Automatic bike light design files
The KiCad project lives in the emdcomputer-crypto/Automatic-bike-light repository on GitHub; these links point at the commit this page was built from.
- LayoutHardware/stardance.kicad_pcb
- SchematicHardware/stardance.kicad_sch
Automatic bike light: common questions
What microcontroller does the Automatic bike light use?
The Automatic bike light is built around the XIAO_ESP32_S3, from the ESP32 family.
How big is the Automatic bike light PCB?
The Automatic bike light measures 120 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Automatic bike light?
23 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Automatic bike light design files?
From the emdcomputer-crypto/Automatic-bike-light repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Automatic bike light design in my own project?
The repository has no license, so all rights stay with emdcomputer-crypto. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Automatic bike light without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k