Midi Keyboard

emdcomputer-crypto·Midi_Keyboard·Hardware/Midi.kicad_pcb

Midi Keyboard PCB layout, top view — open source ESP32 board by emdcomputer-crypto

About the Midi Keyboard PCB

Midi Keyboard is an open source ESP32 PCB design by emdcomputer-crypto, published on GitHub. It is a 2-layer board measuring 97 × 71 mm, with 9 components from 6 distinct parts.

Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 5 switches, 1 IC and 1 connector.

It belongs with the keyboards and audio designs in this gallery.

From the project

Making a midi keyboard for half life week 3 following the guide

This is my 7-key MIDI keypad project for Hack Club Half Life Week 3 It features custom capacitive touch pads mx switches, a rotary encoder, slide potentiometers. I used Kai Pereira's MIDI Keypad tutorial as a loose guide, but I customized the layout to make my own capacitive touch pads with a mix of rectangular and hexagonal shapes.

1. Making the Capacitive Touch Pads: I designed the 7-key touch pads directly in KiCad's Footprint Editor. I made sure to uncheck F.Paste so solder paste won't be applied to the pads, leaving the copper exposed so it detects your finger. I also set a 0.5mm…

Midi Keyboard, from the project README
From the project README

Main components on the Midi Keyboard

Midi Keyboard bill of materials (BOM)

9 components, 6 distinct parts.

QtyPartRefs
1
Waveshare ESP32-S3-ZERO
U1
1
TouchButtons
J1
1
SLIDER1
RV1
1
SLIDER2
RV2
4
SW_Push
SW1, SW2, SW3, SW5
1
RotaryEncoder_Switch_MP
SW4

Midi Keyboard design files

The KiCad project lives in the emdcomputer-crypto/Midi_Keyboard repository on GitHub; these links point at the commit this page was built from.

Midi Keyboard: common questions

What microcontroller does the Midi Keyboard use?

The Midi Keyboard is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.

How big is the Midi Keyboard PCB?

The Midi Keyboard measures 97 × 71 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Midi Keyboard?

9 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Midi Keyboard design files?

From the emdcomputer-crypto/Midi_Keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Midi Keyboard design in my own project?

The repository has no license, so all rights stay with emdcomputer-crypto. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Midi Keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards