Ha eink calendar

emilecantin·ha-eink-calendar·hardware/battery-carrier/battery-carrier.kicad_pcb

Ha eink calendar PCB layout, top view — open source ESP32 board by emilecantin

About the Ha eink calendar PCB

Ha eink calendar is an open source ESP32 PCB design by emilecantin, published on GitHub. It is a 2-layer board measuring 60 × 30 mm, with 9 components from 8 distinct parts.

Its main chip is the to ESP32, from the ESP32 family. Other key parts include the TP4056 module. By type, the board carries 3 capacitors, 2 connectors, 2 resistors, 1 IC and 1 switch.

It belongs with the displays & leds, iot & wireless and power & battery designs in this gallery.

From the project

A battery-powered IoT calendar display that shows your Home Assistant calendar events on a large 12.48" tri-color e-paper screen.

A battery-powered IoT calendar display that shows your Home Assistant calendar events on a large 12.48" tri-color e-paper screen.

- Large e-paper display — Waveshare 12.48" tri-color (black/white/red) - Battery optimized — Deep sleep between updates, ETag caching to skip unnecessary refreshes - Native HA integration — Custom component with Python renderer, no external server needed - Device discovery — ESP32 auto-discovers HA via mDNS, appears as a discovered device - Weather integration — Shows daily forecast from any HA weather entity - Waste collection — Icon-only display for…

Main components on the Ha eink calendar

Ha eink calendar bill of materials (BOM)

9 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TP4056 module
U1
1
18650
J1
1
to ESP32
J2
1
SPST
SW1
1
100NF
100nF
C1
1
220uF 10V
C2
1
10UF
10uF
C3
2
100k 1%
R1, R2

Ha eink calendar design files

The KiCad project lives in the emilecantin/ha-eink-calendar repository on GitHub; these links point at the commit this page was built from.

Ha eink calendar: common questions

What microcontroller does the Ha eink calendar use?

The Ha eink calendar is built around the to ESP32, from the ESP32 family.

How big is the Ha eink calendar PCB?

The Ha eink calendar measures 60 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ha eink calendar?

9 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ha eink calendar design files?

From the emilecantin/ha-eink-calendar repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ha eink calendar design in my own project?

The repository has no license, so all rights stay with emilecantin. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ha eink calendar without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards