CarteSecondaire
About the CarteSecondaire PCB
CarteSecondaire is an open source PCB design by ENACRobotique, published on GitHub. It is a 2-layer board measuring 52 × 66 mm, with 30 components from 23 distinct parts.
By type, the board carries 5 resistors, 3 transistors, 2 diodes and 2 capacitors.
It belongs with the robotics & motion designs in this gallery.
From the project
Dépôt des cartes électroniques de l'équipe ENAC Robotique
Repository for electronic circuits design
CarteSecondaire bill of materials (BOM)
30 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | IRLML0030 | SOT-23 | Q1, Q2, Q3 |
| 1 | CONTACT_1 | HE14_EMBASE_1x02 | CONTACT1 |
| 1 | CONTACT_2 | HE14_EMBASE_1x02 | CONTACT2 |
| 1 | AX12_1 | Molex_SPOX_5267-03A_1x03_P2.50mm_Vertical | DYNAMIXEL1 |
| 1 | AX12_2 | Molex_SPOX_5267-03A_1x03_P2.50mm_Vertical | DYNAMIXEL2 |
| 1 | ENC_MOT_1 | HE14_EMBASE_1x04 | ENC_MOT1 |
| 1 | ENC_MOT_2 | HE14_EMBASE_1x04 | ENC_MOT2 |
| 1 | ENC_FOL_1 | HE14_EMBASE_1x04 | ENC_RC1 |
| 1 | ENC_FOL_2 | HE14_EMBASE_1x04 | ENC_RC2 |
| 1 | EV1 | HE14_EMBASE_1x02 | EV1 |
| 1 | EV2 | HE14_EMBASE_1x02 | EV2 |
| 1 | MOT_PWM_2 | HE14_EMBASE_1x03 | MOT_PWM2 |
| 1 | POMPE1 | HE14_EMBASE_1x02 | POMPE1 |
| 1 | POMPE2 | HE14_EMBASE_1x02 | POMPE2 |
| 1 | MOT_PWM_1 | HE14_EMBASE_1x03 | PWM_MOT1 |
| 1 | SERVO1 | PinHeader_1x03_P2.54mm_Vertical | SERVO1 |
| 1 | SERVO2 | PinHeader_1x03_P2.54mm_Vertical | SERVO2 |
| 1 | SERVO3 | PinHeader_1x03_P2.54mm_Vertical | SERVO3 |
| 1 | TSR_1-2450 | Converter_DCDC_TRACO_TSR-1_THT | TSR_1-2450 |
| 2 | PMEG2020EH | D_SOD-123F | D3, D4 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | C | C_0805_2012Metric | C3, C4 |
| 4 | 10k | R_0805_2012Metric | R3, R7, R8, R9 |
| 1 | 1k | R_0805_2012Metric | R10 |
CarteSecondaire design files
The KiCad project lives in the ENACRobotique/elec repository on GitHub; these links point at the commit this page was built from.
CarteSecondaire: common questions
How big is the CarteSecondaire PCB?
The CarteSecondaire measures 52 × 66 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CarteSecondaire?
30 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the CarteSecondaire design files?
From the ENACRobotique/elec repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CarteSecondaire design in my own project?
The repository has no license, so all rights stay with ENACRobotique. Use it as a reference, and ask the author before reusing the design.
More boards in elec
ESP32PAMI 2026
75 × 69 mm50 parts2LNo license2
CartePrincipaleRobot
150 × 100 mm40 parts2LNo license2
NXPPrincipal2019
69 × 76 mm39 parts2LNo license2
Carte PCA9685
68 × 86 mm31 parts2LNo license2
RobotA 2020
87 × 78 mm26 parts2LNo license2
CarteAlimRobot
54 × 51 mm19 parts2LNo license2
STM32Panelized pompe sap
93 × 146 mm18 parts2LNo license2
ESP32Max3232id breakout
70 × 75 mm15 parts2LNo license2
CartePrincipaleR1
100 × 100 mm13 parts2LNo license2
CarteAlim
70 × 50 mm9 parts2LNo license2
AVR/ArduinoUseless box
43 × 31 mm8 parts2LNo license2
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
11ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979
Powerstep
95.2 × 71.5 mm28 parts4LGPL-3.0979
Diff driver
32 × 22 mm14 parts2LGPL-3.0979