Max3232id breakout
About the Max3232id breakout
Max3232id breakout is an open source ESP32 PCB design by ENACRobotique, published on GitHub. It is a 2-layer board measuring 70 × 75 mm, with 15 components from 9 distinct parts.
Its main chip is the DOIT-ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the MAX3232 and TSR_1-2450. By type, the board carries 5 capacitors, 3 ICs, 3 resistors, 2 connectors and 2 jumpers.
It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.
From the project
Dépôt des cartes électroniques de l'équipe ENAC Robotique
Repository for electronic circuits design
Main components on the Max3232id breakout
Max3232id breakout bill of materials (BOM)
15 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX3232 | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | DOIT-ESP32-DEVKIT-V1 | ESP32-DOIT-DEVKIT | U2 |
| 1 | TSR_1-2450 | Converter_DCDC_TRACO_TSR-1_THT | U3 |
| 1 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02 | TerminalBlock_bornier-2_P5.08mm | J2 |
| 2 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 5 | 100n | C_0805_2012Metric | C1, C2, C3, C4, C5 |
| 2 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | A Calculer | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
Max3232id breakout design files
The KiCad project lives in the ENACRobotique/elec repository on GitHub; these links point at the commit this page was built from.
Max3232id breakout: common questions
What microcontroller does the Max3232id breakout use?
The Max3232id breakout is built around the DOIT-ESP32-DEVKIT-V1, from the ESP32 family.
How big is the Max3232id breakout?
The Max3232id breakout measures 70 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Max3232id breakout?
15 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Max3232id breakout design files?
From the ENACRobotique/elec repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Max3232id breakout design in my own project?
The repository has no license, so all rights stay with ENACRobotique. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Max3232id breakout without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in elec
ESP32PAMI 2026
75 × 69 mm50 parts2LNo license2
CartePrincipaleRobot
150 × 100 mm40 parts2LNo license2
NXPPrincipal2019
69 × 76 mm39 parts2LNo license2
Carte PCA9685
68 × 86 mm31 parts2LNo license2
CarteSecondaire
52 × 66 mm30 parts2LNo license2
RobotA 2020
87 × 78 mm26 parts2LNo license2
CarteAlimRobot
54 × 51 mm19 parts2LNo license2
STM32Panelized pompe sap
93 × 146 mm18 parts2LNo license2
CartePrincipaleR1
100 × 100 mm13 parts2LNo license2
CarteAlim
70 × 50 mm9 parts2LNo license2
AVR/ArduinoUseless box
43 × 31 mm8 parts2LNo license2
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3k
ESP32Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Badge
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Racer
36 × 50.2 mm70 parts4LApache-2.03.8k