HardLabs

UPSMonitorModule

enriquewph·esp-map·hardware/UPSMonitorModule/UPSMonitorModule.kicad_pcb

UPSMonitorModule PCB layout, top view — open source PIC board by enriquewph

About the UPSMonitorModule PCB

UPSMonitorModule is an open source PIC PCB design by enriquewph, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 70 mm, with 67 components from 33 distinct parts.

Its main chip is the PIC18F26K80_ISS, from the PIC family. Other key parts include the DS1307Z+, LM2596S-3.3, AMS1117-5.0, PC847 and ACS759. By type, the board carries 25 resistors, 11 capacitors, 10 connectors, 8 ICs, 5 diodes and 4 relays.

It belongs with the iot & wireless designs in this gallery.

From the project

Modular hardware for IoT & home automation

[contributors-shield]: https://img.shields.io/github/contributors/enriquewph/esp-map.svg?style=for-the-badge [contributors-url]: https://github.com/enriquewph/esp-map/graphs/contributors [forks-shield]: https://img.shields.io/github/forks/enriquewph/esp-map.svg?style=for-the-badge [forks-url]: https://github.com/enriquewph/esp-map/network/members [stars-shield]: https://img.shields.io/github/stars/enriquewph/esp-map.svg?style=for-the-badge [stars-url]: https://github.com/enriquewph/esp-map/stargazers [issues-shield]…

Main components on the UPSMonitorModule

DS1307Z+LM2596S-3.3AMS1117-5.0PIC18F26K80_ISSPC847ACS759ULN2003APC814

UPSMonitorModule bill of materials (BOM)

67 components, 33 distinct parts.

QtyPartRefs
1
DS1307Z+
U1
1
LM2596S-3.3
U2
1
AMS1117-5.0
U3
1
PIC18F26K80_ISS
U4
1
PC847
U5
1
ACS759
U6
1
ULN2003A
U7
1
PC814
U8
1
BC817
Q1
1
32768Hz
Y1
1
I2C/ICSP/UART
J1
1
Conn_01x06
J2
2
Conn_01x03
J3, J4
2
Conn_01x02
J5, J6
4
Screw_Terminal_01x03
J7, J8, J9, J10
1
CR2032
BT1
4
RELAY
K1, K2, K3, K4
2
SS14
D1, D5
1
LED
D2
2
BAT54S
D3, D4
Show 13 more
QtyPartRefs
1
68uH
L1
2
470uF
C1, C3
1
22uF
C2
6
100nF
C4, C5, C6, C7, C8, C11
2
1uF
C9, C10
13
10k
R1, R2, R5, R6, R7, R8, R9, R10 +5
2
100k
R3, R4
1
330
R11
1
100
R12
4
1k
R16, R20, R21, R22
1
5k6
R17
1
22k
R19
2
100K
R24, R25

UPSMonitorModule design files

The KiCad project lives in the enriquewph/esp-map repository on GitHub; these links point at the commit this page was built from.

UPSMonitorModule: common questions

What microcontroller does the UPSMonitorModule use?

The UPSMonitorModule is built around the PIC18F26K80_ISS, from the PIC family.

How big is the UPSMonitorModule PCB?

The UPSMonitorModule measures 100 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the UPSMonitorModule?

67 components, from 33 distinct parts. The full bill of materials is listed on this page.

Where can I download the UPSMonitorModule design files?

From the enriquewph/esp-map repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the UPSMonitorModule design in my own project?

Yes, under the terms of its MIT license, which enriquewph chose for the repository.

Can I test firmware for the UPSMonitorModule without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in esp-map

Similar boards