HardLabs

UPSMonitorStandalone rev01

enriquewph·esp-map·hardware/UPSMonitorStandalone_rev01/UPSMonitorStandalone_rev01.kicad_pcb

UPSMonitorStandalone rev01 PCB layout, top view — open source ESP32 board by enriquewph

About the UPSMonitorStandalone rev01 PCB

UPSMonitorStandalone rev01 is an open source ESP32 PCB design by enriquewph, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 70 mm, with 103 components from 38 distinct parts.

Its main chip is the ESP32, from the ESP32 family. Other key parts include the MAX3232, DS1233A-10, LM2596S-3.3, AMS1117-5.0 and ACS759. By type, the board carries 36 resistors, 15 capacitors, 14 diodes, 13 ICs, 11 connectors and 5 transistors.

It belongs with the iot & wireless designs in this gallery.

From the project

Modular hardware for IoT & home automation

[contributors-shield]: https://img.shields.io/github/contributors/enriquewph/esp-map.svg?style=for-the-badge [contributors-url]: https://github.com/enriquewph/esp-map/graphs/contributors [forks-shield]: https://img.shields.io/github/forks/enriquewph/esp-map.svg?style=for-the-badge [forks-url]: https://github.com/enriquewph/esp-map/network/members [stars-shield]: https://img.shields.io/github/stars/enriquewph/esp-map.svg?style=for-the-badge [stars-url]: https://github.com/enriquewph/esp-map/stargazers [issues-shield]…

Main components on the UPSMonitorStandalone rev01

MAX3232DS1233A-10ESP32LM2596S-3.3AMS1117-5.0ACS759ACS712PC817XI

UPSMonitorStandalone rev01 bill of materials (BOM)

103 components, 38 distinct parts.

QtyPartRefs
1
MAX3232
U1
1
DS1233A-10
U2
1
ESP32
U3
1
LM2596S-3.3
U4
1
AMS1117-5.0
U5
1
ACS759
U6
1
ACS712
U7
6
PC817XI
U8, U9, U10, U11, U12, U13
4
BC817
Q1, Q3, Q4, Q5
1
IRLML2502
Q2
3
Conn_01x03
J1, J2, J3
3
Screw_Terminal_01x03
J4, J5, J6
1
Screw_Terminal_01x02
J7
1
Conn_01x06
J8
1
ICSP
J9
1
Conn_01x10
J10
1
Conn_01x05
J12
2
SolderJumper_3_Bridged12
JP1, JP2
1
SolderJumper_2_Open
JP3
3
RELAY
K1, K2, K3
Show 18 more
QtyPartRefs
2
SW_Push
SW1, SW2
1
WS2812B
D1
2
SS14
D2, D12
4
LED
D3, D5, D7, D11
3
M7
D4, D6, D8
4
BAT54S
D9, D10, D13, D14
1
68uH
L1
6
100nF
C1, C7, C10, C12, C13, C14
5
100nF
C2, C3, C4, C5, C6
1
1uF
C8
2
470uF
C9, C11
1
1nF
C15
21
1k
R1, R10, R11, R12, R13, R14, R15, R16 +13
10
10k
R2, R3, R4, R5, R6, R7, R30, R32 +2
1
22k
R8
1
5k6
R9
1
2k
R23
2
100
R27, R28

UPSMonitorStandalone rev01 design files

The KiCad project lives in the enriquewph/esp-map repository on GitHub; these links point at the commit this page was built from.

UPSMonitorStandalone rev01: common questions

What microcontroller does the UPSMonitorStandalone rev01 use?

The UPSMonitorStandalone rev01 is built around the ESP32, from the ESP32 family.

How big is the UPSMonitorStandalone rev01 PCB?

The UPSMonitorStandalone rev01 measures 100 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the UPSMonitorStandalone rev01?

103 components, from 38 distinct parts. The full bill of materials is listed on this page.

Where can I download the UPSMonitorStandalone rev01 design files?

From the enriquewph/esp-map repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the UPSMonitorStandalone rev01 design in my own project?

Yes, under the terms of its MIT license, which enriquewph chose for the repository.

Can I test firmware for the UPSMonitorStandalone rev01 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in esp-map

Similar boards