77 open source boards using the ULN2003A
Real designs built with the ULN2003A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Interface board 1
Green-bms
107 × 54 mm63 parts2LCC-BY-SA-4.0752STM32
Gk pcbv3
jncronin
108 × 158.8 mm276 parts6LNo license78STM32
Delta
Scottapotamas
199.9 × 69.3 mm231 parts4LNo license53ESP8266
Split flap fae
codingcatgirl
40 × 80 mm39 parts2LApache-2.030Oxikit-Brainboard
shridattdudhat
100 × 100 mm67 parts2LGPL-3.012ESP32
4 channel home automation
ampnics
95 × 55 mm62 parts2LNo license10ESP32
SmartRV-AIO-SMD
RoBro92
108 × 80.8 mm56 parts2LAGPL-3.04AVR/Arduino
Vut arcar
wykys
60 × 36 mm53 parts2LMIT3PiScope
cutec-chris
65 × 56 mm41 parts2LNo license3ESP32
IoT Gateway STM32F407VGTx
minhtenlado
146.1 × 112.6 mm184 parts6LNo license2RP2040/RP2350
Nyu openplc te
kiwih
155 × 108 mm153 parts2LGPL-3.02Radiohat 2.0 Preliminary (not a Hat)
mpvano
85 × 56 mm153 parts4LMIT2ESP8266
K9AY with wifi
ra0sms
144.2 × 108.1 mm137 parts2LMIT2PCB BatteryECU
Knektium
103.2 × 117 mm72 parts2LNo license2Pluralsight Drumkit RevB Driver
jzkmath
100 × 100 mm54 parts2LGPL-3.02PCB2 Display
Andreas-Wahl
78.7 × 38.1 mm32 parts2LCC-BY-NC-4.02Pcb stepperdriver uln2003
matt-alencar
35.3 × 42.3 mm7 parts2LMIT2RP2040/RP2350
2040Inverter
Kirg5
86.4 × 61.9 mm93 parts4LNo license1PIC
Perenquen
supernudo
75.8 × 101 mm90 parts2LNo license1PIC
Projector screen controller
flirbleoss
97.2 × 106 mm65 parts2LCustom license1Scanner
cellularmitosis
99.1 × 132.1 mm64 parts2LMIT1AVR/Arduino
Chickencoop3.2
vinthewrench
130 × 100 mm47 parts2LMIT1STM32
ETH1CLCR2
BehrensG
160 × 100 mm591 parts6LNo license0Panel display
CarnivalBen
191.7 × 104.9 mm240 parts2LNo license0AVR/Arduino
Queue-Local-Display-ATmega328PB
ByNS-KARACA
340 × 100 mm188 parts2LNo license0Stim
rusefi
182.5 × 165 mm169 parts2LNo license0AVR/Arduino
Kneippometer
MartinFeichtinger
160 × 100 mm135 parts2LNo license0ESP32
Proyecto de cuatrinestre
Juliodelarosap
102.4 × 83.1 mm98 parts4LNo license0ESP32
RoomLink
RobertoAngelLora
102.4 × 83.1 mm98 parts4LNo license0ESP32
Gps seven seg clock
JWehle
101.6 × 101.6 mm95 parts4LApache-2.00ESP32
Electronics homeassistant multisensor
crgarcia12
78.4 × 84.3 mm92 parts2LNo license0Moxl
perryc
65 × 56 mm88 parts6LApache-2.00RP2040/RP2350
Selftest Board
FirstTestStation
300 × 150 mm88 parts4LCERN-OHL-W-2.00NXP
Kanelbulle
h4xxel
50 × 50 mm86 parts2LMIT0ESP32
KediSavar
derdds
100 × 100 mm83 parts2LNo license0STM32
Board for-Relay-Card
chapppy
102 × 84 mm76 parts2LGPL-3.00
How designs wire the ULN2003A
Read from the KiCad layouts of 65 open source designs, one per repository: what each pin of the ULN2003A connects to, and the resistors, capacitors and other passives placed on it.
- The O7 pin is left unconnected on 39 of 65 designs (a signal on 25).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 91% | — |
| O7pin 10 | Connected to: Not connected 60% · a signal 38% | — |
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Interface board 1 by Green-bms, Gk controls by jncronin, Delta by Scottapotamas and Split flap fae pcb by codingcatgirl.
The ULN2003A in open source designs
The gallery holds 77 open source boards using the ULN2003A from 66 GitHub repositories; a typical one measures about 100 × 83.1 mm and carries around 67 components.
81% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is Interface board 1 by Green-bms.
Parts used alongside the ULN2003A
Microcontrollers on boards using the ULN2003A
What boards using the ULN2003A are built for
ULN2003A: common questions
Where can I find a ULN2003A reference design?
Each of the 77 boards on this page is a real design using the ULN2003A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ULN2003A O7 pin connected?
The O7 pin is left unconnected on 39 of 65 designs (a signal on 25). Counted from the KiCad layouts of 65 open source designs using the ULN2003A.
What parts are used alongside the ULN2003A?
The AMS1117-3.3, USBLC6-2SC6, 4N35, 74HC595 and CH340C appear in the most repositories here.
Which microcontrollers do boards using the ULN2003A use?
Most are built on AVR/Arduino (21), ESP32 (16), STM32 (5) and PIC (5).
How big is a typical board using the ULN2003A?
The median is 100 × 83.1 mm, and 81% are two-layer designs.
What is the most popular open source board using the ULN2003A?
By GitHub stars, Interface board 1 by Green-bms, with 752 stars.
Can I simulate one of these boards using the ULN2003A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.