Game midi breakout
epakai·game_midi_breakout
About the Game midi breakout
Game midi breakout is an open source PCB design by epakai, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 24.2 × 12.2 mm, with 18 components from 12 distinct parts.
Other key parts include the 6N138. By type, the board carries 6 resistors, 5 capacitors, 3 connectors, 2 transistors, 1 IC and 1 diode.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
A DB-15 MIDI breakout PCB that fits inside those grey clam-shell connector housings.
This is my compact hobbyist design for converting game port (DB-15) to MIDI ports. It's made in Kicad. The PCB fits inside a GOLD-TEK/GTK DH151 connector housing.
The previous revision had incorrect transistor pinouts, but I was able to verify its functionality with a bodge (upside-down transistors). This rev has had minor mods to schematic, and a near-complete re-layout. You're taking a chance I messed something up if you build it without verifying.

Main components on the Game midi breakout
Game midi breakout bill of materials (BOM)
18 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 6N138 | SMDIP-8_W7.62mm | U1 |
| 2 | MMBT3904 | SOT-23 | Q1, Q2 |
| 1 | MIDI IN | midi pads | J1 |
| 1 | MIDI OUT | midi pads | J2 |
| 1 | Game Port | DSUB-15_Male_EdgeMount_P2.77mm | J5 |
| 1 | 1N4148 | D_SOD-323 | D1 |
| 3 | 0.1μF | C_0805_2012Metric | C1, C4, C5 |
| 2 | 220pF | C_0805_2012Metric | C2, C3 |
| 2 | 220 | R_0805_2012Metric | R1, R6 |
| 2 | 2.2K | R_0805_2012Metric | R2, R4 |
| 1 | 10K | R_0805_2012Metric | R3 |
| 1 | 270 | R_0805_2012Metric | R5 |
Game midi breakout design files
The KiCad project lives in the epakai/game_midi_breakout repository on GitHub; these links point at the commit this page was built from.
- Layoutgame_midi_breakout.kicad_pcb
- Schematicgame_midi_breakout.kicad_sch
Game midi breakout: common questions
How big is the Game midi breakout?
The Game midi breakout measures 24.2 × 12.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Game midi breakout?
18 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Game midi breakout design files?
From the epakai/game_midi_breakout repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Game midi breakout design in my own project?
Yes, under the terms of its GPL-3.0 license, which epakai chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k