CRABStat
erdc·ACEStat_Kicad_Deprecated
About the CRABStat PCB
CRABStat is an open source PCB design by erdc, published on GitHub under the SHL-2.1 license. It is a 2-layer board measuring 25 × 67.6 mm, with 74 components from 22 distinct parts.
Other key parts include the aducm_355, FT232RQ and ADM7154. By type, the board carries 38 capacitors, 15 resistors, 8 inductors, 4 connectors, 4 test points and 3 ICs.
It belongs with the usb & debug tools designs in this gallery.
From the project
Deprecated Kicad Board Files for the ACEStat
run git submodule init to get the symbol and footprint libraries
the gerber folder is a placeholder to maintain paths. gerber files are generated via a program and should not be stored in this repo
JTAG GPIO BREAKOUT is a programming connector and an io breakout connector
Citation "ACEstat: A DIY Guide to Unlocking the Potential of Integrated Circuit Potentiostats for Open-Source Electrochemical Analysis" Eric W. Brown, Matthew W. Glasscott, Keith Conley, Jesse Barr, Jason D. Ray, Lee C. Moores, and Anton Netchaev* https://pubs.acs.org/doi/10.1021/acs.analchem.1c04226
Main components on the CRABStat
CRABStat bill of materials (BOM)
74 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | aducm_355 | aducm355 | U1 |
| 1 | FT232RQ | QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm | U2 |
| 1 | ADM7154 | LFCSP_8Lead_CP_8_21 | U3 |
| 1 | 32MHz | Crystal_SMD_Abracon_ABM10-4Pin_2.5x2.0mm | Y1 |
| 1 | 70246-2001 USB_C_Receptacle_USB2.0 Molex | USB_C_Receptacle_Amphenol_12401610E4-2A | J1 |
| 1 | 203955-0503 Conn_02x25_Odd_Even Molex | Molex_SlimStack_2039560503 | J2 |
| 1 | 22-28-4084 EC_Sensor_Input_3_Pin Molex | PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | 90131-0770 EC_Sensor_Input_3_Pin Molex | PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 1 | SW_Push | SW_SPST_B3S-1000 | SW1 |
| 4 | TestPoint | TestPoint_Keystone_5019_Minature | TP1, TP2, TP3, TP4 |
| 8 | Ferrite_Bead | L_0402_1005Metric | FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8 |
| 2 | 7pF | C_0402_1005Metric | C1, C7 |
| 19 | 0.1uF | C_0402_1005Metric | C2, C3, C4, C5, C8, C9, C10, C11 +11 |
| 1 | 220pF | C_0402_1005Metric | C6 |
| 4 | 10uF | C_0402_1005Metric | C13, C39, C40, C43 |
| 4 | 4.7uF | C_0402_1005Metric | C14, C15, C16, C23 |
| 6 | 0.47uF | C_0402_1005Metric | C17, C18, C21, C28, C29, C31 |
| 2 | 1uF | C_0402_1005Metric | C41, C42 |
| 11 | 0 | R_0402_1005Metric | R1, R13, R14, R15, R16, R17, R18, R19 +3 |
| 2 | 2.2 | R_0402_1005Metric | R2, R3 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 200 | R_0402_1005Metric | R4 |
| 1 | 100k | R_0402_1005Metric | R5 |
CRABStat design files
The KiCad project lives in the erdc/ACEStat_Kicad_Deprecated repository on GitHub; these links point at the commit this page was built from.
CRABStat: common questions
How big is the CRABStat PCB?
The CRABStat measures 25 × 67.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CRABStat?
74 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CRABStat design files?
From the erdc/ACEStat_Kicad_Deprecated repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the CRABStat design in my own project?
It is published under SHL-2.1, which limits how it may be reused; read the license before building on it.
More boards in ACEStat_Kicad_Deprecated
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389