11 open source boards using the FT232RQ

Real designs built with the FT232RQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the FT232RQ

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the FT232RQ connects to, and the resistors, capacitors and other passives placed on it.

  • The CBUS3 pin is left unconnected on 7 of 7 designs.
  • The TEST pin is tied to GND on 7 of 7 designs.
  • The OSCI pin is left unconnected on 7 of 7 designs.
  • The OSCO pin is left unconnected on 7 of 7 designs.
VCCIOpin 1Connected to: 3.3V 57% · a signal 43%
  • Decoupling capacitor on 71% · 100 nF (6), 10 µF (1)
RXDpin 2Connected to: A connector 29%
  • Series resistor on 43% · 270 Ω (1), 0 Ω (1)
R1#pin 3Connected to: Not connected 86%
GNDpin 4, 17, 20Connected to: GND 100%
NCpin 5, 12, 13, 23, 25, 29Connected to: Not connected 100%
DSR#pin 6Connected to: Not connected 86%
DCD#pin 7Connected to: Not connected 86%
CBUS4pin 9Connected to: Not connected 86%
CBUS2pin 10Connected to: Not connected 86%
CBUS3pin 11Connected to: Not connected 100%
3V3OUTpin 16Connected to: Signal 71% · 3.3V 29%
  • Capacitor to GND on 71% · 100 nF (5)
RESET#pin 18Connected to: Not connected 71% · a signal 29%
VCCpin 19Connected to: 5V 71% · a signal 29%
  • Decoupling capacitor on 71% · 100 nF (3), 4.7 µF (2), 10 µF (2)
AGNDpin 24Connected to: GND 100%
TESTpin 26Connected to: GND 100%
OSCIpin 27Connected to: Not connected 100%
OSCOpin 28Connected to: Not connected 100%
TXDpin 30Connected to: A connector 29%
  • Series resistor on 43% · 270 Ω (1), 0 Ω (1)
DTR#pin 31Connected to: Not connected 71% · a signal 29%
PADpin 33Connected to: GND 60% · not connected 40%

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esp8266-smartwatch by Jeija, MSP430 Breadstick - Apple Sauce by upsidedownlabs, FTDI-MCU-Programmer by Smartech-git and CentralCommand by AlanFord.

The FT232RQ in open source designs

The gallery holds 11 open source boards using the FT232RQ from 7 GitHub repositories; a typical one measures about 42.8 × 38.4 mm and carries around 74 components.

55% are two-layer designs, the rest use four layers or more, and 64% carry an open source license.

The most starred is Esp8266-smartwatch by Jeija.

Microcontrollers on boards using the FT232RQ

FT232RQ: common questions

Where can I find a FT232RQ reference design?

Each of the 11 boards on this page is a real design using the FT232RQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the FT232RQ CBUS3 pin connected?

The CBUS3 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the FT232RQ.

How is the FT232RQ TEST pin connected?

The TEST pin is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the FT232RQ.

How is the FT232RQ OSCI pin connected?

The OSCI pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the FT232RQ.

Which microcontrollers do boards using the FT232RQ use?

Most are built on STM32 (6), ESP8266 (1) and TI MSP430/CC (1).

How big is a typical board using the FT232RQ?

The median is 42.8 × 38.4 mm, and 55% are two-layer designs.

What is the most popular open source board using the FT232RQ?

By GitHub stars, Esp8266-smartwatch by Jeija, with 233 stars.

Can I simulate one of these boards using the FT232RQ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part