PLAster128
About the PLAster128 PCB
PLAster128 is an open source PCB design by evietron, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 17.4 × 60.6 mm, with 51 components from 11 distinct parts.
Other key parts include the XC6206 and XC9572XL-VQ64. By type, the board carries 21 resistors, 18 diodes, 6 capacitors, 2 ICs, 2 connectors and 1 switch.
It belongs with the retro computing designs in this gallery.
From the project
Open Source Hardware for Vintage Computers
These are some hardware devices that I use for my vintage machines. I used to sell some of these, but I no longer have the bandwidth to build these specfic items so I have made the designs open-source. Designs may have been derived from various information I scrubbed from the internet, but layouts are my own. Feel free to make your own builds, modifications, or to ask me questions about how to build.
Main components on the PLAster128
PLAster128 bill of materials (BOM)
51 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6206 | SOT-23 | U1 |
| 1 | XC9572XL-VQ64 | LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | AVR-JTAG-10 | PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | Conn_02x24_Counter_Clockwise | DIP-48_W15.24mm | J2 |
| 1 | SW_DIP_x03 | SW_DIP_SPSTx03_Slide_6.7x9.18mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 18 | 1N4148WS | D_SOD-323 | D1, D2, D3, D4, D5, D6, D7, D8 +10 |
| 1 | C1015 Ferrite_Bead_Small | C_0805_2012Metric | FB1 |
| 4 | 100NF 100nF | C_0402_1005Metric | C1, C2, C3, C4 |
| 2 | 1UF 1uF | C_0805_2012Metric | C5, C6 |
| 3 | 10K | R_0402_1005Metric | R1, R2, R3 |
| 18 | 3.3K | R_0402_1005Metric | R4, R5, R6, R7, R8, R9, R10, R11 +10 |
PLAster128 design files
The KiCad project lives in the evietron/BackBit-OpenSource repository on GitHub; these links point at the commit this page was built from.
PLAster128: common questions
How big is the PLAster128 PCB?
The PLAster128 measures 17.4 × 60.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PLAster128?
51 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PLAster128 design files?
From the evietron/BackBit-OpenSource repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PLAster128 design in my own project?
Yes, under the terms of its GPL-3.0 license, which evietron chose for the repository.
More boards in BackBit-OpenSource
PLAster
17.4 × 36.1 mm27 parts2LGPL-3.041
4mbup
247.3 × 26.9 mm24 parts2LGPL-3.041
Genesis to c64
44.5 × 62.5 mm22 parts2LGPL-3.041
Mem coco
73.5 × 69.1 mm15 parts2LGPL-3.041
Contrast
38.2 × 31 mm11 parts2LGPL-3.041
Sidecar
57 × 26.5 mm8 parts2LGPL-3.041
Backbit bbc ashtray
28 × 50 mm5 parts2LGPL-3.041
Keyboard
35.8 × 22 mm4 parts2LGPL-3.041
Similar boards
OpenTendo
Redherring32
196.3 × 118.7 mm93 parts2LTAPR-OHL-1.0850
24pin flex interposer
Wren6991
29 × 32 mm3 parts2LNo license508
Sram dev board
50 × 50 mm12 parts2LNo license508
GB-BRK-SLOT-A
Gekkio
81 × 80 mm20 parts2LCC-BY-4.0376
GB-BRK-SLOT-B
81 × 80 mm20 parts2LCC-BY-4.0376
GB-BRK-CPU-G2
80 × 80 mm12 parts2LCC-BY-4.0376