30 open source boards using the XC6206

Real designs built with the XC6206, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

30 boardsClear filters|Most starred

How designs wire the XC6206

Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the XC6206 connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a decoupling capacitor on 20 of 22 designs, most often 1 µF (then 4.7 µF).
  • The VO pin has a decoupling capacitor on 11 of 22 designs, most often 1 µF (then 10 µF).
GNDpin 1Connected to: GND 91%
VOpin 2Connected to: 3.3V 55% · a signal 45%
  • Decoupling capacitor on 50% · 1 µF (11), 10 µF (2), 10 nF (1)
VIpin 3Connected to: 5V 82% · a signal 18%
  • Decoupling capacitor on 91% · 1 µF (19), 4.7 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 4mbup by evietron, Slime88 by zykrah, GRAM-SLIM by GRAMCTRL and Rii-518bt usb qmk pcb by tangles-0.

The XC6206 in open source designs

The gallery holds 30 open source boards using the XC6206 from 22 GitHub repositories; a typical one measures about 103.3 × 84.6 mm and carries around 59 components.

83% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.

The most starred is PLAster128 by evietron.

Microcontrollers on boards using the XC6206

XC6206: common questions

Where can I find a XC6206 reference design?

Each of the 30 boards on this page is a real design using the XC6206. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the XC6206 VI pin?

The VI pin has a decoupling capacitor on 20 of 22 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 22 open source designs using the XC6206.

What decoupling capacitors do designs use on the XC6206 VO pin?

The VO pin has a decoupling capacitor on 11 of 22 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 22 open source designs using the XC6206.

What parts are used alongside the XC6206?

The USBLC6-2SC6, RP2040, W25Q128JVS, STM32F072CBT6 and X05A26H12G appear in the most repositories here.

Which microcontrollers do boards using the XC6206 use?

Most are built on RP2040/RP2350 (12), STM32 (6), AVR/Arduino (2) and ESP8266 (1).

How big is a typical board using the XC6206?

The median is 103.3 × 84.6 mm, and 83% are two-layer designs.

What is the most popular open source board using the XC6206?

By GitHub stars, PLAster128 by evietron, with 41 stars.

Can I simulate one of these boards using the XC6206 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part