11 open source boards using the XC9572XL-VQ64

Real designs built with the XC9572XL-VQ64, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the XC9572XL-VQ64

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the XC9572XL-VQ64 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pins have a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 1 µF).
  • The VCCIO pins have a decoupling capacitor on 6 of 9 designs, most often 100 nF (then 470 nF).
VCCpin 3, 37Connected to: 3.3V 100%
  • Decoupling capacitor on 78% · 100 nF (14), 1 µF (1), 470 nF (1)
GNDpin 14, 21, 41, 54Connected to: GND 100%
VCCIOpin 26, 55Connected to: 3.3V 100%
  • Decoupling capacitor on 67% · 100 nF (14), 470 nF (1), 1 µF (1)

56 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include .C68 by ProbablyNotArtyom, PLAster128 by evietron, RIPPLE-IDE by LIV2 and Zx tsid by UzixLS.

The XC9572XL-VQ64 in open source designs

The gallery holds 11 open source boards using the XC9572XL-VQ64 from 9 GitHub repositories; a typical one measures about 100 × 85 mm and carries around 69 components.

73% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is .C68 by ProbablyNotArtyom.

Parts used alongside the XC9572XL-VQ64

Microcontrollers on boards using the XC9572XL-VQ64

What boards using the XC9572XL-VQ64 are built for

XC9572XL-VQ64: common questions

Where can I find a XC9572XL-VQ64 reference design?

Each of the 11 boards on this page is a real design using the XC9572XL-VQ64. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the XC9572XL-VQ64 VCC pin?

The VCC pins have a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the XC9572XL-VQ64.

What decoupling capacitors do designs use on the XC9572XL-VQ64 VCCIO pin?

The VCCIO pins have a decoupling capacitor on 6 of 9 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 9 open source designs using the XC9572XL-VQ64.

Which microcontrollers do boards using the XC9572XL-VQ64 use?

Most are built on PIC (2), AVR/Arduino (1) and ESP8266 (1).

How big is a typical board using the XC9572XL-VQ64?

The median is 100 × 85 mm, and 73% are two-layer designs.

What is the most popular open source board using the XC9572XL-VQ64?

By GitHub stars, .C68 by ProbablyNotArtyom, with 51 stars.

Can I simulate one of these boards using the XC9572XL-VQ64 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part